2008/12/08 Caterpillar


Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}

Usage:

3208 02Z
Challenger:
  • All
    Engine: Truck
  • All
  • Service Magazine, SEPD0089, 21 October 1991, "Procedure to Check for Electrical Terminal Post Leaks on Unit Injectors". Disregard the article. The information in the original article is no longer valid. Refer to the information below.

    The 1U-6661 Pop Tester Gp was cancelled and replaced by components that were also cancelled or discontinued. The tester was rendered obsolete by increased injection pressures and by performance requirements for injectors.

    Do not use the 1U-6661 Pop Tester Gp to test unit injectors.

    Do not use any off-engine diagnostic test on fuel injectors or fuel nozzles prior to installation of the injectors or nozzles. Caterpillar Fuel Systems Division does not recommend the use of any test equipment that is outside of the factory for field evaluation of injectors and nozzles prior to the installation of the injectors or nozzles.

    Caterpillar Information System:

    R438 Voltage Regulator Excitation Current Limit - Adjust
    C18 Industrial Engine Exhaust Temperature Is High
    C9 Engines for Motor Graders Coolant Contains Fuel
    2008/12/01 Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
    2008/12/01 New Software Is Available for Some C27 and C32 Generator Set Engines {1901, 1920}
    C18 Industrial Engine Exhaust Has Excessive White Smoke
    C32 Marine Engine Maintenance Recommendations
    C18 Industrial Engine Exhaust Has Excessive Black Smoke
    C18 Industrial Engine Engine Top Speed Is Not Obtained
    R438 Voltage Regulator Stability - Adjust
    R438 Voltage Regulator Wiring Diagram
    C18 Industrial Engine Engine Shutdown Is Intermittent
    Replacement of the Capacitors and the Inverters on the UPS{4480, 7451} Replacement of the Capacitors and the Inverters on the UPS{4480, 7451}
    R438 Voltage Regulator Droop - Adjust
    2010/03/22 New Software Is Available for Some C13 and C15 On-Highway Engines {1901, 1920}
    3408E and 3412E Engines for Caterpillar Built Machines Oil Contains Fuel
    2008/12/01 The Delivery Inspection Checklist is Now in the Petroleum Transmission Operation and Maintenance Manuals {3030}
    2008/12/01 Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
    C32 Marine Engine Overhaul (Major)
    CX35-P800 Petroleum Transmission Safety Messages
    C18 Industrial Engine Oil Pressure Is Low
    C18 Industrial Engine Oil Temperature Is High
    2009/03/09 Improved Wire Assemblies for the Combustion Sensors Are Used {1408, 1563}
    CX35-P800 Petroleum Transmission Specifications
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.