The electronic unit injector is no longer capable of delivering the correct amount of fuel.
System Response:
The warning light on the control panel will flash. The Electronic Control Module (ECM) will log the diagnostic code.
Note: The diagnostic code can be viewed on the electronic service tool or the display on the control panel.
Possible Performance Effect:
The engine will be derated by 20%.
Troubleshooting:
Replace the suspect electronic unit injector. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove" and Disassembly and Assembly, "Electronic Unit Injector - Install".
Use the electronic service tool to perform the Fuel System Verification Test.
Test Step 1. Perform the following diagnostic procedure: "None"
Results:
- OK - STOP