CID 0002 FMI 02
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects the following condition:
- Data from the electronic unit injector for the No. 2 cylinder is out of limits.
- Diagnostic code 0168-01 is not active.
- Diagnostic codes 0002-05 and 0002-06 are not active.
- No 0041 diagnostic codes are active.
- No 0262 diagnostic codes are active.
- Diagnostic code 0190-08 is not active.
- No 0110 diagnostic codes are active.
System Response:
The warning light on the control panel will flash. An active diagnostic code will be generated. The ECM will log the diagnostic code.
Possible Performance Effect:
The engine will be derated while this diagnostic code is active.
Troubleshooting:
Test Step 1. Perform the following diagnostic procedure: "Injector Data Incorrect - Test"
Results:
- OK - STOP
Caterpillar Information System:
C4.4 Generator Set Engines CID 0001 FMI 02
325 VARIABLE UNDERCARRIAGE VH Undercarriage/VM Undercarriage Hydraulic System Specifications - VH Undercarriage
G3412C, G3508, G3512 and G3516 Engines Status Control Module Low Oil Pressure Shutdown Occurrence
3500C Marine Engines Air Inlet and Exhaust Lines
C6.6 Marine Generator Set Cooling System Coolant Level - Check
C4.4 Generator Set Engines Diagnostic Code Cross Reference
C6.6 Marine Generator Set Cooling System Coolant (ELC) - Change
C4.4 Generator Set Engines Intake Air Temperature Is Too High
C4.4 Generator Set Engines Excessive White Smoke
C4.4 Generator Set Engines Excessive Fuel Consumption
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overspeed Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module Engine Overcrank Occurrence
C27 and C32 Industrial Engines Turbocharger - Remove
C4.4 Generator Set Engines CID 0003 FMI 02
C4.4 Generator Set Engines CID 0004 FMI 02
C4.4 Generator Set Engines CID 0001 FMI 07
C4.4 Generator Set Engines CID 0002 FMI 07
C4.4 Generator Set Engines CID 0003 FMI 07
C4.4 Generator Set Engines CID 0004 FMI 07
C27 and C32 Industrial Engines Turbocharger - Install
C4.4 Generator Set Engines CID 0041 FMI 03
C4.4 Generator Set Engines CID 0041 FMI 04
C27 and C32 Industrial Engines Exhaust Manifold - Remove and Install
C27 and C32 Industrial Engines Exhaust Elbow - Remove and Install