Water Pump
Show/hide table
| |
| 图 1 | g03406975 |
Show/hide table
| 276-4755 水泵总成和 336-2213 水泵总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 246-3129 泵叶轮 | 泵叶轮应与轴平齐，偏差在 |
| 2 | 1 | 153-1256 唇形密封 | 安装唇形密封时，使主密封唇朝向水泵主动齿轮。 用压具压装油封，直到油封与壳体表面齐平，如图所示。 请勿用手安装唇形密封。 |
| 3 | 1 | 276-4756 密封件总成 | 将密封总成压装到轴上，直到杯完全座入泵壳体内。 |
| 4 | 1 | 195-0319 齿轮 | 压装齿轮，直到齿轮与轴承平齐。 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
C32 Petroleum Engines Safety Messages
C13, C15, and C18 Tier 4 Final Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
CX28 On-Highway Transmission Transmission Planetary
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Drift - Check - Loaded Bucket
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines Turbocharger
Air Conditioning and Heating R134a for All Caterpillar Machines Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines Condensate Drainage System
AccuGrade® GPS (CD700) Display Settings
C15-XQ400 Rental Generator Set Wiring Diagrams
C9-XQ300 Rental Generator Set Wiring Diagrams
C7 and C9 On-Highway Engines Turbocharger Air Line Has Oil Present
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
3512, 3508 and 3516 Generator Sets Maintenance Recommendations
C7 PETROLEUM Petroleum Engine Cylinder Head - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines Visual Inspection (Troubleshooting)
C27 and C32 Industrial Engines Fuel System - Prime
Air Conditioning and Heating R134a for All Caterpillar Machines Heating System Troubleshooting
Servicing the 3E-8969 Receptacle As , the 262-6073 Receptacle As , and the 290-8858 Connector Receptacle As {1120, 1408} Servicing the 3E-8969 Receptacle As , the 262-6073 Receptacle As , and the 290-8858 Connector Receptacle As {1120, 1408}
G3408C and G3412C Engines Camshaft Bearing Position