C9.3B Engines Caterpillar

Cylinder Head Valves

Usage:

D6 B72

Show/hide table




Illustration 1	g06361838

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	12	490-1729 Inlet Valve	Before assembly of cylinder head valves, coat the valve guide inside diameter with clean engine oil.
			Diameter of valve head is 41.50 ± 0.13 mm (1.634 ± 0.005 inch).
			Face angle is 60.5 ± 0.25 degrees.
2	12	490-1728 Exhaust Valve	Before assembly of cylinder head valves, coat the valve guide inside diameter with clean engine oil.
			Diameter of valve head is 37.50 ± 0.13 mm (1.476 ± 0.005 inch).
			Face angle is 45.75 ± 0.25 degrees.
3	24	349-5307 Spring	Length under test force is 47.35 mm (1.864 inch).
			Test force is 465.0 ± 23.3 N (104.5 ± 5.2 lb).
			Approximate free length after test is 77.9 mm (3.07 inch).
4	24	349-5303 Spring	Length under test force is 46.15 mm (1.817 inch).
			Test force is 232.5 ± 11.6 N (52.3 ± 2.6 lb).
			Approximate free length after test is 74.60 mm (2.937 inch).
Before assembly of valve guide, coat the cylinder head bore for valve guide with clean engine oil.
5	24	255-8665 Valve Guide	Install the valve guide from the spring side of the cylinder head. Check the inside diameter of the valve guide for distortion after installation into the cylinder head.
			Outside diameter is 13.030 ± 0.008 mm (0.5130 ± 0.0003 inch).
			Inside diameter is 8.072 ± 0.013 mm (0.3178 ± 0.0005 inch).
After assembly of the valve guide into the cylinder head, install the seal onto the top of the valve guide.
D1		-	Diameter of valve stem is 8.000 ± 0.010 mm (0.3150 ± 0.0004 inch).

Show/hide table




Illustration 2	g06361885

Show/hide table

Table 2
Item	Qty	Part	Specification Description
D2	-	-	Depth of the bore in the cylinder head for the inlet valve seat insert is 9.30 ± 0.05 mm (0.366 ± 0.002 inch).
D3	-	-	Depth of the bore in the cylinder head for the exhaust valve seat insert is 10.40 ± 0.05 mm (0.409 ± 0.002 inch).
D4	-	-	Diameter of the inlet 255-8666 Valve Seat Insert is 42.560 ± 0.013 mm (1.6756 ± 0.0005 inch).
D4	-	-	Bore in cylinder head for the inlet valve seat insert is 42.500 ± 0.015 mm (1.6732 ± 0.0006 inch).
D5	-	-	Diameter of the exhaust 262-2959 Valve Seat Insert is 39.060 ± 0.013 mm (1.5378 ± 0.0005 inch).
D5	-	-	Bore in cylinder head for the exhaust valve seat insert is 39.000 ± 0.015 mm (1.5354 ± 0.0006 inch).

Caterpillar Information System:

D9T Track-Type Tractor Systems Bevel and Transfer Gears

D3-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Diesel Particulate Filter - Clean/Replace

3512E Oil Well Service Engine Engine Air Cleaner Element (Dual Element) - Replace

988K XE Wheel Loader STIC Control (Steering Deadband) - Adjust

Side/Snow Counterweight Mounting Plate Assembly May Fail on Certain 910K and 914K Compact Wheel Loaders {7056} Side/Snow Counterweight Mounting Plate Assembly May Fail on Certain 910K and 914K Compact Wheel Loaders {7056}

C9.3B Engines Air Lines

D9T Track-Type Tractor Systems Transmission Planetary

Insulation on Exhaust Components for 3500 and C175 Machine Engines {1061} Insulation on Exhaust Components for 3500 and C175 Machine Engines {1061}

C9.3B Engines Valve Mechanism

C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Injector Trim File - Install - Injector Trim Code - Install

C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Injector Trim File - Install

3512E Oil Well Service Engine Overhaul (Major)

C9.3B Engines Speed/Timing Sensor

Rework Procedure for Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} Rework Procedure for Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}

3512E Oil Well Service Engine Fuel System Secondary Filter - Replace

D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Fuel System Primary Filter (Water Separator) - Drain

3512E Oil Well Service Engine Fuel System Primary Filter/Water Separator - Drain

C9.3B Engines Cylinder Head

D6 Track-Type Tractor Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install

3512E Oil Well Service Engine Engine Air Precleaner - Check/Clean

3512E Oil Well Service Engine Engine Oil Level - Check

3512E Oil Well Service Engine Engine Oil and Filter - Change

Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180} Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}

D8T and D9T Track-Type Tractors Torque Converter