Torque Converter - Remove
拆卸步骤
Show/hide table
| 需要的工具 | |||
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
| B | 1U-9200 | 杠杆式拔拉起重机 | 1 |
| C | 1P-2420 | 变速箱修复台 | 2 |
开始:
- 分离变矩器。 请参阅拆解和组装, "变速箱和变矩器 - 分离"。
- 将工具 (A) 和适当的起吊设备装在变矩器组件 (2) 上。 将工具 (B) 装在变矩器组件 (2) 上。 变矩器组件 (2) 的重量约为 1108 kg (2440 lb)。
Show/hide table
 | |
| 图 1 | g01435343 |
- 旋转变矩器组件 (2) 。
- 将变矩器组件 (1) 装在工具 (C) 上。 拆下工具 (B) （未显示）和适当的起吊设备。
Show/hide table
 | |
| 图 2 | g01435372 |
- 将工具 (A) 装在变矩器组件 (1) 上。
Show/hide table
 | |
| 图 3 | g01447719 |
- 拆下螺栓 (2) 。
Show/hide table
 | |
| 图 4 | g01447720 |
- 拆下螺栓 (3) 。
Show/hide table
 | |
| 图 5 | g01447723 |
- 稍微升起变矩器 (1) ，然后拆下分动器 (4) 。
Show/hide table
 | |
| 图 6 | g01447725 |
Show/hide table
 | |
| 图 7 | g01447727 |
- 拆下变矩器 (1) 。 变矩器 (1) 的重量约为 532 kg (1173 lb)。 将变矩器 (1) 放置在工具 (B) （未显示）上。
Caterpillar Information System:
C9 Petroleum Engines Housing (Front) - Install
C15 and C18 Petroleum Generator Sets Speed Sensor - Clean/Inspect
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Connect
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Separate
C9 Petroleum Engines Housing (Front) - Remove
2007/12/03 Improved PL1000T Hardware and Software is Now Available {7610}
C3.3 Industrial Engine Model View Illustrations
C4.4 Generator Set Engines Injector Data Incorrect - Test
G3520B Industrial Engines Diagnostic Trouble Codes
G3520B Industrial Engines Event Codes
3176C, 3406E and 3456 Industrial Engines ECM Does Not Communicate with Other Modules
3516B Engine for 994F and 994H Wheel Loaders Coolant Contains Oil
TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Assemble
C4.4 Generator Set Engines Injector Solenoid Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
C9 Petroleum Engines Crankcase Breather - Remove and Install
G3600 Engines Sensor Signal (PWM) - Test
C9 Petroleum Engines Cylinder Block Cover - Remove and Install
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Fasteners
G3600 Engines Fuel Control - Test
320D and 323D Excavators Hydraulic System Swing Drive
C9 Petroleum Engines Rocker Arm and Shaft - Install