C13 and C15 On-highway Engines Caterpillar


Vehicle Activity Report Parameters

Usage:

C15 B5R

"Minimum Idle Time"

The "Vehicle Activity Report" provides a log of engine operation in chronological order. This report records the following items: "vehicle starts", "vehicle stops", "idle time", "driving time" and "PTO time". The "Minimum Idle Time" parameter can be used to adjust the recorded idle time. This is done in order to remove the time for the following occurrences: stopped in traffic, switching into PTO mode and switching out of PTO mode and idling for other brief periods of time. If the "Minimum Idle Time" is programmed to a value above 0 minutes (default), the previous mode of operation will be logged until the idle time exceeds the programmed limit.

Table 1
Default  Minimum  Maximum 
0 Minutes  0 Minutes  1440 Minutes 

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.