Fan Guard - Remove and Install
Start By:
- Remove the engine enclosure group. Refer to Disassembly and Assembly, "Engine Enclosure Group - Remove and Install".
- Remove bolts (1). Remove fan guard (2).
- Repeat Step 1 for the opposite side fan guard.
Show/hide table
| |
| Illustration 1 | g01254643 |
- Position fan guard (2). Install bolts (1).
- Repeat Step 1 for the opposite side fan guard.
Show/hide table
|
| |
| Illustration 2 | g01254643 |
End By:
- Install the engine enclosure group. Refer to Disassembly and Assembly, "Engine Enclosure Group - Remove and Install".
Caterpillar Information System:
C4.4 Industrial Engine Glow Plugs
CX31 On-Highway Transmission Torque Converter Troubleshooting
C3.3 and C4.4 Generator Sets Fan - Remove and Install
C4.4 Industrial Engine Connecting Rod - For Use With Steel Crankshaft
2006/04/10 New Supplier for Glow Plugs {1254, 1254, 1412}
C4.4 Industrial Engine Engine Oil Pump
C4.4 (Mech) Industrial Engine Engine Oil Bypass Valve
C4.4 Industrial Engine Cylinder Block
C4.4 Industrial Engine Cylinder Head
C9.3 Industrial Engine Flywheel Housing
C9.3 Industrial Engine Flywheel
C3.3 and C4.4 Generator Sets Radiator - Remove and Install
C4.4 Industrial Engine Main Bearing Journal - Steel Crankshaft
C3.3 and C4.4 Generator Sets Engine - Remove
C3.3 and C4.4 Generator Sets Engine - Install
2006/03/01 Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
C27 and C32 Tier 4 Final Marine Engines Temperature Sensor
3500B and 3500C Locomotive Engines System Overview
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C7 On-highway Engine Air Inlet Elbow
C4.4 Industrial Engine Electronic Control Module