Crankshaft Pulley
Show/hide table
 | |
| Illustration 1 | g01228250 |
- Tighten the eight bolts (1) to 20 ± 15 N·m (15 ± 11 lb ft).
Note: Tighten the bolts in a 180 degree pattern.
- Tighten all eight bolts to a torque of 55 ± 10 N·m (40 ± 7 lb ft).
Caterpillar Information System:
C7 Marine Engine Exhaust Elbow
2013/08/21 Reminder for Troubleshooting Electronic Actuators {1130}
C7 Marine Engine Electronic Control Module
3512B Oil Well Servicing Engine (ADEM III) Coolant Temperature Is Too High
3512B Oil Well Servicing Engine (ADEM III) Excessive Black Smoke
3512B Oil Well Servicing Engine (ADEM III) Exhaust Temperature Is Too High
3512B Oil Well Servicing Engine (ADEM III) Intermittent Engine Shutdown
3512B Oil Well Servicing Engine (ADEM III) Intermittent Low Power or Power Cutout
3512B Oil Well Servicing Engine (ADEM III) Low Engine Oil Pressure
3406E Engine Speed/Timing Sensor - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Cat Data Link
3126B and 3126E Truck Engines Water Pump
C7 Marine Engine Jacket Water Heater
3512B Oil Well Servicing Engine (ADEM III) Emergency Stop Switch
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Remove
320D and 323D Excavators Machine System Specifications Main Control Valve
2008/02/11 New Injectors are Being Offered in Place of Remanufactured Injectors {1290}
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Install
C175 Generator Set Engines Camshaft - Install
C6.6 Generator Sets Plate Locations and Film Locations
3512B Oil Well Servicing Engine (ADEM III) Speed Control
C7 Marine Engine Electric Starting Motor
C7 Marine Engine Electric Starting Motor
3512B Oil Well Servicing Engine (ADEM III) Pulse Width Modulated Sensor