Selector Valve (Torque Converter Lockup Clutch) - Assemble
Assembly Procedure
Note: Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Install spacer (14) and spring (13) into valve assembly (4) .
Show/hide table
Illustration 1 | g00471050 |
- Install O-ring seal (12) onto cover (11). Position cover (11) onto valve assembly (4) and install two bolts (10) .
Show/hide table
Illustration 2 | g00470801 |
- Install O-ring seal (9) onto spool (5). Install guide (8), spring (7), spool (6) and spool (5) into valve assembly (4) .
Show/hide table
Illustration 3 | g00470799 |
- Install O-ring seal (3) onto cover (2). Position cover (2) onto valve assembly (4) and install two bolts (1) .
Show/hide table
Illustration 4 | g00470797 |
End By: Install the selector valve. Refer to Disassembly and Assembly, "Selector Valve (Torque Converter Lockup Clutch) - Install". The information is in this manual.
Caterpillar Information System:
902 and 906 Compact Wheel Loaders Steering System Visual Inspection
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Install
D8R Track-Type Tractor Engine Air Precleaner - Clean
631E Series II Wheel Tractor-Scrapers Differential and Final Drive Oil Sample - Obtain
G3B, K3A and L3A Denso Alternators Component Description
953C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Install
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Remove
3406E and 3456 Engines for Caterpillar Built Machines General Information
980G Wheel Loader Hydraulic System Piston Motor (Hydraulic Fan)
3406E and 3456 Engines for Caterpillar Built Machines Cooling System
980G Wheel Loader Steering System Temperature Sensor (Hydraulic Oil)
953C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Remove
963C Track-Type Loader Machine Systems Tilt Cylinder - Disassemble
D8R Track-Type Tractor Ether Starting Aid Cylinder - Replace
D9R Track-Type Tractor Fuel Tank and Fuel System Water Separator - Drain
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Disassemble
980G Wheel Loader Hydraulic System Pilot Valve (Oil Manifold)
963C Track-Type Loader Machine Systems Tilt Cylinder - Assemble
3406E and 3456 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Assemble
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Install
980G Wheel Loader Hydraulic System Pressure Reducing Valve
G3B, K3A and L3A Denso Alternators Normal Operation
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Slip Joint - Remove and Install