Transmission Control - Conventional Steering
Show/hide table
Illustration 1 | g00477144 |
The travel direction of the machine is determined by using the lever on the left side of the steering column.
Show/hide table
Forward (1) - Move the lever toward the front of the machine. The machine will move forward. |
Show/hide table
Neutral (2) - Move the lever to the center position. The machine should not move. |
Show/hide table
Reverse (3) - Move the lever toward the rear of the machine. The machine will move in reverse. |
Show/hide table
Illustration 2 | g00477145 |
The transmission gear speed is determined by rotating the switch on the direction selector lever.
1 - First Gear
2 - Second Gear
3 - Third Gear
4 - Fourth Gear
Show/hide table
Illustration 3 | g00477135 |
The travel direction and the transmission gear speed will be displayed on the front dash.
Caterpillar Information System:
953C Track-Type Loader Tracks
953C Track-Type Loader Bucket Positioner
953C Track-Type Loader Monitoring System
994 Wheel Loader Steering System Steering Metering Pump
953C Track-Type Loader Light Switches
966G and 972G Wheel Loaders Transmission Control - Command Control Steering
992G Wheel Loader Electrohydraulic System Pilot Control Actuator Current (Proportional Solenoid) - Check
611 Wheel Tractor-Scraper 3306B Engine Supplement Radiator - Remove
953C Track-Type Loader Window Wiper and Washer Control
953C Track-Type Loader Heating and Air Conditioning Controls - If Equipped
627F Wheel Tractor-Scraper Heating and Air Conditioning Control
631E Series II Wheel Tractor-Scrapers Backup Alarm
613C Series II Wheel Tractor 3116 Engine Supplement Radiator - Disassemble
3306B Industrial Engine Walk-Around Inspection
966G and 972G Wheel Loaders Autoshift Control - Earlier Machines
611 Wheel Tractor-Scraper 3306B Engine Supplement Fan and Fan Drive - Remove
613C Series II Wheel Tractor 3116 Engine Supplement Radiator - Assemble
966G and 972G Wheel Loaders Implement Lockout Control
994 Wheel Loader Hydraulic System Linkage Pin and Seal Group (Bucket Control)
953C Track-Type Loader Shipping the Machine
953C Track-Type Loader Stopping the Engine
953C Track-Type Loader Changing Direction and Speed
953C Track-Type Loader Cutting Edges and Bucket Teeth
953C Track-Type Loader Equipment Lowering with Engine Stopped