Engine Oil Filter Base
3054 Engine
Show/hide table
 | |
| Illustration 1 | g00886450 |
Typical example | |
3056 Engine
Show/hide table
 | |
| Illustration 2 | g00635927 |
Typical example | |
(1) Engine oil filter base
- The bypass valve in the engine oil filter will open with the following pressure difference. ... 55 to 83 kPa (8 to 12 psi)
Note: Apply 9S-3263 Thread Lock Compound to the first three threads of the bolts that secure the base to the engine block.
Caterpillar Information System:
K65-12B Voltage Regulator Dimensions
C7 and C9 On-Highway Engines Cooling Fan Circuit and A/C High Pressure Switch Circuit - Test
3126B and 3126E On-highway Engines 0111-04 Coolant Level voltage low (12)
PMG3516 Power Module Fuel Metering Valve - Check - Raptor
3412E, C30 and C32 Marine Engines Pistons and Connecting Rods - Install
3500 Generator Set Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Electronic Modular Control Panel II (EMCP II) EMCP Electronic Control (Generator Set) - Replace
3412E, C30 and C32 Marine Engines Pistons and Connecting Rods - Remove
Electronic Modular Control Panel II (EMCP II) EMCP Electronic Control (AC Transformer Box) - Replace
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Electrical Connector - Inspect
Electronic Modular Control Panel II (EMCP II) GSC CID 0268 - FMI 02
2002/05/01 The New 204-8041 Gauge Group Is Available To Measure The Top Ring Groove On Pistons {1214}
K65-12B Voltage Regulator Stability - Adjust
3412E, C30 and C32 Marine Engines Pistons and Connecting Rods - Install
3056E Industrial Engine Crankshaft
3412E, C30 and C32 Marine Engines Connecting Rod Bearings - Remove
K65-12B Voltage Regulator Voltage - Adjust
K65-12B Voltage Regulator Droop - Adjust
3054 and 3056 Marine Generator Set Engines Engine Oil Cooler
330C Excavator Machine System Specifications Recoil Spring
797B Off-Highway Truck Air System Pressure Protection Valve (Air System)
3412E, C30 and C32 Marine Engines Crankshaft - Remove
2007/08/20 C-12/3176C/3196 Front Housing Bolts {1151}
3126B and 3126E On-highway Engines Injection Actuation Pressure - Test