Fuel Transfer Pump
Usage:
Performance:
Full bypass pressure 682 to 751 kPa (99 to 109 psi) at 1724 rpm.
3.07 L/Min (.810 gpm) minimum at 575 rpm with 482 kPa (70 psi) back pressure.
Inlet suction 206 kPa (60.84 mm of Hg) after 30 seconds at 100 rpm.
7.09 L/Min (1.871 gpm) at 2300 rpm with 585.5 to 654.5 kPa (85 to 95 psi) back pressure.
Caterpillar Information System:
3408C & 3412C INDUSTRIAL ENGINES Fuel Injection Lines
3408C & 3412C INDUSTRIAL ENGINES Governor And Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES Electronic Control Group
3408C & 3412C INDUSTRIAL ENGINES Harness Assembly
3408C & 3412C INDUSTRIAL ENGINES Wiring Group
3408C & 3412C INDUSTRIAL ENGINES Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES Fuel Injection Pump
3408C & 3412C INDUSTRIAL ENGINES Fuel Injection Pump And Governor
3408C & 3412C INDUSTRIAL ENGINES Engine Design
3408C & 3412C INDUSTRIAL ENGINES Introduction
G3612 & G3616 TWO STAGE AFTERCOOLOER Operation And Maintenance
3408C & 3412C INDUSTRIAL ENGINES Primary Fuel Filter
3408C & 3412C INDUSTRIAL ENGINES Fuel Filter Base
3408C & 3412C INDUSTRIAL ENGINES Fuel Lines Group
3408C & 3412C INDUSTRIAL ENGINES Valve Mechanism Covers
3408C & 3412C INDUSTRIAL ENGINES Valve Rocker Arms, Lifters And Bridges
3408C & 3412C INDUSTRIAL ENGINES Valves, Valve Springs And Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES Cylinder Heads
3408C & 3412C INDUSTRIAL ENGINES Front Housing And Covers
3408C & 3412C INDUSTRIAL ENGINES Front Gear Group (Timing)
3408C & 3412C INDUSTRIAL ENGINES Camshaft
3408C & 3412C INDUSTRIAL ENGINES Inlet Air And Exhaust Lines
3408C & 3412C INDUSTRIAL ENGINES Exhaust Manifolds