Correction of the Disassembly and Assembly Manual for the Installation of the Main Hydraulic Pump and Pump Drive Coupling {5062, 5070}
- Excavator:
- 345B L (PIN: 4SS; 7KS; 9GS; 2NW; 2SW)
- 345B LC (PIN: BFG)
Note: Install a new flange in the drive coupling when the flange is disassembled from the pump drive unit and the flange does not have a backing plate.
Caterpillar Information System:
322C Excavator Fuel System Filter - Replace
320C Excavator Access Door and Cover Locations
3406E and 3456 Engines for Caterpillar Built Machines Speed and Timing Sensor
C-9 Engines for Caterpillar Built Machines Slave Piston Lash - Adjust
3524B Engines for 797 and 797B Off-Highway Trucks Engine Oil Pressure - Test
325D and 329D Excavators Ether Starting Aid Cylinder - Replace - If Equipped
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Speed Control Valve
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Speed Control Valve
M325B Excavator Machine System Specifications Control Valve (Main)
322C Excavator Engine Oil and Filter - Change
M325B Excavator Machine System Specifications Lines (Travel Motor) - Upper
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Hydraulic Cylinder
2000/10/30 The Spring Seat Washer Is Now A Serviceable Component Of The Rocker Arm Cover Base Assembly {1102}
5110B Excavator Bucket Linkage - Inspect/Adjust
315C Excavator Cab Visor - If Equipped
322C Excavator Fuel System - Prime
307B Excavator VA Boom Controls
325C and 325C L Excavator Fuel System Water Separator - Drain
320C Excavator Storage Box
M325B Material Handler Power Train Travel Motor - Remove
3406E and 3456 Engines for Caterpillar Built Machines Engine Support (Front)
320C Excavator Specifications
325C and 325C L Excavator Fuel System Primary Filter (Water Separator) Element - Replace
M325B Material Handler Hydraulic System Oil Filter (Case Drain) - Replace - Wheel Brakes and Lower Manifold