Improved Tow Arm is Now Used on Certain AP300F and AP355F Asphalt Pavers {7121}
- Asphalt Paver
- AP300F (S/N: NNN1-106; YES1-110; WHY1-172)
- AP355F (S/N: NED1-114; NRG1-133,135-137; NTT1-114)
Description Of Change: Improved tow arm is now used on certain AP300F and AP355F Asphalt Pavers. The improved tow arm has a smoother edges to increase the service life of the plate.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Use Table 1 to order the parts as needed.
Show/hide table
Required Parts | ||
Qty | Part Number | Part Name |
2 | Plate | |
4 | Screw |
Caterpillar Information System:
Rework Procedure to Implement a New Tow Arm Design on Certain AP300F and AP355F Asphalt Pavers {7121} Rework Procedure to Implement a New Tow Arm Design on Certain AP300F and AP355F Asphalt Pavers {7121}
A New Filter Base Is Now Used On Certain F Series Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {5068, 5091, 5092} A New Filter Base Is Now Used On Certain F Series Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {5068, 5091, 5092}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Speed Control Valve
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Speed Control Valve
Improved Routing for Brake Hose Is Now Used on Certain 740 EJ and 745 Articulated Trucks {4257, 4304} Improved Routing for Brake Hose Is Now Used on Certain 740 EJ and 745 Articulated Trucks {4257, 4304}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Rollover Protective Structure (ROPS)
C175 Tier 4 Final Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
994K Wheel Loader Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet Nitrogen Oxide Sensor 1
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Fuel System - Inspect - LNG
994K Wheel Loader Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet Nitrogen Oxide Sensor 2
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Engine Components - Rebuild/Install Reman
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Fuel Tank - Dry
994K Wheel Loader Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet Nitrogen Oxide Sensor 2
New Lifter Assembly Mechanism is Now used on Certain Off-Highway Truck Engines {1000, 1209} New Lifter Assembly Mechanism is Now used on Certain Off-Highway Truck Engines {1000, 1209}
Camshaft with Suspect Intake Lobes are Replaced with Reworked C175 Engine Camshafts Stocked in Caterpillar® Parts System {1210} Camshaft with Suspect Intake Lobes are Replaced with Reworked C175 Engine Camshafts Stocked in Caterpillar® Parts System {1210}
Improved Chassis Software is Now Available for Certain 725C, 730C, and 730C EJ Articulated Trucks {7490, 7610, 7620} Improved Chassis Software is Now Available for Certain 725C, 730C, and 730C EJ Articulated Trucks {7490, 7610, 7620}
24 Motor Grader Systems Control Valve (Implement)
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Methane Gas Detector System - Check
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Methane Gas Detector - Test
New Turbochargers are Now Used on Certain C175-16 and C175-20 Installed in 793F and 797F Mining Trucks {1052, 1053} New Turbochargers are Now Used on Certain C175-16 and C175-20 Installed in 793F and 797F Mining Trucks {1052, 1053}
Real Time Clock is no Longer Supported {1901} Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901} Real Time Clock is no Longer Supported {1901}
MD6200 Rotary Drill Maintenance Interval Schedule