Side Plate Skid Plate - Inspect/Replace
Show/hide table
 |
|
Personal injury or death can result from the blade falling. Block the blade before changing blade tips. |
Show/hide table
| |
| Illustration 1 | g06310200 |
- Raise lift arms to a height that will relieve pressure on the side panel skid plates. Blocking should be placed under the frame and moldboard sections to prevent unexpected movement.
- Remove nuts from skid plate.
- Remove skid plate.
- Install new skid plate.
Show/hide table
Illustration 2 g06315254 (A) Height of the steel edge is 8 mm (0.3 inch)
(A) Height of the rubber edge is16 mm (0.6 inch) - Raise the snow push and remove the blocking.
Caterpillar Information System:
Snow Push and Plows Work Tool Supplement Plate Locations and Film Locations
Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266} Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266}
The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304} The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304}
A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304} A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304}
24 Motor Grader Systems Oil Filter (Hydraulic Return)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger
New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057} New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057}
An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326} An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326}
3516E Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Final Drive Oil (Rear) - Change
A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312} A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312}
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
2D GRADE System for 24 Next Gen Motor Graders Electrical Power Supply - Test
Snow Push and Plows Work Tool Supplement Springs - Inspect/Replace
C9.3 Engine for Caterpillar Built Machines Fuel Transfer Pump
24 Motor Grader Drawbar Ball and Socket End Play - Check/Adjust
MD6200 Rotary Drill Prepare the Machine for Maintenance
Proximity Sensor on the Stabilizer Legs May Become Open Circuit on Certain Telehandlers {1408, 7222, 7332} Proximity Sensor on the Stabilizer Legs May Become Open Circuit on Certain Telehandlers {1408, 7222, 7332}
Joystick Control Assembly May Malfunction on Certain Telehandlers {5063, 5705} Joystick Control Assembly May Malfunction on Certain Telehandlers {5063, 5705}
BD118 and BD121 Side Discharge Bucket Bearings - Lubricate
BD118 and BD121 Side Discharge Bucket Conveyor Belt Tension and Tracking - Adjust
24 Motor Grader Power Train Service Brake (Wheel Spindle) - Remove and Install
New Rework Procedure Now Used for the Engine Wiring Harness on Certain 793D Off-Highway Trucks to Allow Air Conditioning to Function {1408} New Rework Procedure Now Used for the Engine Wiring Harness on Certain 793D Off-Highway Trucks to Allow Air Conditioning to Function {1408}
3516E Engines for Caterpillar Built Machines Voltage Control (Load Protection) - Remove and Install