Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266}
- Load Haul Dump
- R2900G (S/N: NLK1-189)
- R3000H (S/N: RCY1-130)
Description Of Change:
Show/hide table
| |
| Illustration 1 | g06312213 |
|
View of lower ROPS mount (1) | |
Bolts (1) on the lower ROPS mount may be loose or missing. Refer to the following procedure to check two bolts (1).
Adaptable To: The procedure to check the 8T-9377 Bolt connections, is adaptable to the above listed machines.
Procedure
Show/hide table
| Parts Required | ||
| Qty | Part Number | Part Description |
| 2 | Locknut | |
| 4 | Hard Washer | |
| 2 | Bolt | |
- Remove skirt (2).
Show/hide table
Illustration 3 g06312228 (1) 8T-9377 Bolt
(3)3K-6060 Locknut
(4)5P-1075 Hard Washer - Install bolt (1), two hard washers (4), and locknut (3), at two places on the lower ROPS mount. Refer to Illustration 1 and Illustration 2. Tighten locknut (3) to
47 ± 9 N·m (35 ± 6 lb ft) . - Install skirt (2).
Show/hide table
| |
| Illustration 2 | g06312226 |
| (2) Skirt | |
Caterpillar Information System:
The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304} The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304}
A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304} A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304}
24 Motor Grader Systems Oil Filter (Hydraulic Return)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger
New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057} New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057}
An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326} An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326}
3516E Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Final Drive Oil (Rear) - Change
A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312} A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312}
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Welding on Machines and Engines with Electronic Controls
G3512 Gas Engine Electric Starting Motor
Snow Push and Plows Work Tool Supplement Plate Locations and Film Locations
Snow Push and Plows Work Tool Supplement Side Plate Skid Plate - Inspect/Replace
2D GRADE System for 24 Next Gen Motor Graders Electrical Power Supply - Test
Snow Push and Plows Work Tool Supplement Springs - Inspect/Replace
C9.3 Engine for Caterpillar Built Machines Fuel Transfer Pump
24 Motor Grader Drawbar Ball and Socket End Play - Check/Adjust
MD6200 Rotary Drill Prepare the Machine for Maintenance
Proximity Sensor on the Stabilizer Legs May Become Open Circuit on Certain Telehandlers {1408, 7222, 7332} Proximity Sensor on the Stabilizer Legs May Become Open Circuit on Certain Telehandlers {1408, 7222, 7332}
Joystick Control Assembly May Malfunction on Certain Telehandlers {5063, 5705} Joystick Control Assembly May Malfunction on Certain Telehandlers {5063, 5705}
BD118 and BD121 Side Discharge Bucket Bearings - Lubricate
BD118 and BD121 Side Discharge Bucket Conveyor Belt Tension and Tracking - Adjust
24 Motor Grader Power Train Service Brake (Wheel Spindle) - Remove and Install