"Switches Config" - Determines how the on-board software interprets signals from external switches
"Switch Type" - Specifies the numbered switch as normally open or else as normally closed
"Point Switch Type" - This setting specifies both the switch and the point type. The point type can be the same as that type specified in both the Point Type Description setting and the Point Type Colors setting. This configuration is not a requirement. If the point type is not the same, then a default behavior will apply.
A default behavior applies if the number in Point Switch Type is not included in the "Point Type Description" or the "Point Type Colors" setting. If the "Type" is not included, a point with no description and the color black is created when switch 0 (zero) is closed.
Reference: For additional information on these configuration settings, refer to the MCU Help file, Point Type Selection.