Transmission Oil Pump
Show/hide table
| |
| Illustration 1 | g03726312 |
Show/hide table
| Specification for 362-9554 Gear Pump Gp | |||
| Item | Qty | Part | Specification Description |
| B | 1 | 363-7285 Oil Pump Shaft | Diameter of the shaft is |
| 1 | 2 | 480-6338 Lip Type Seal | Lubricate lightly with the lubricant that is being sealed. |
| E | 1 | 363-7288 Oil Pump Shaft | Diameter of the shaft is |
Show/hide table
| |
| Illustration 2 | g03726313 |
|
View of area C | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 2 | 2 | 361-3994 Bushing | Bore after assembly is |
| Position (G) of bushing joint from the centerline through bushing bores is 45 ± 10 degrees. | |||
| Installation depth (H) is |
|||
| 3 | 1 | 458-0446 Filter Plug | Torque to |
Show/hide table
| |
| Illustration 3 | g03726317 |
|
View of area D | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 4 | 2 | 362-0469 Bushing | Bore after assembly is |
| Position (K) of bushing joint from the centerline through bushing bores is 30 ± 15 degrees. | |||
| Installation depth (M) is |
|||
| N | 2 | 8M-8489 Dowel | Protrusion is |
Caterpillar Information System:
C3.4B Engines Idle Validation - Test
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Load Control Valve Lines
AP500F Asphalt Paver DEF Manifold Filters - Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Diagnostic)
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C4.4 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Lines - Remove and Install
C4.4 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Bevel Gear and Pinion
TA2 Inspection for C4.4 Industrial Engine{0372, 1000, 7000, 753T, 7565} TA2 Inspection for C4.4 Industrial Engine{0372, 1000, 7000, 753T, 7565}
C3.4B Engines DEF Pump Pressure Sensor - Test
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Valve and Lines
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Heat Exchanger (Axle Oil Cooler)
C4.4 Engines for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor on Engine
C4.4 Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Support and Mounting (CEM) - Remove and Install
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Steering Linkage - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Solenoid Valve
AP655D Asphalt Paver Shipping the Machine
Procedure to Install the 458-3103 Precleaner Kit (Cab Powered) For Certain 988K and 986K Wheel Loaders {1055, 1408} Procedure to Install the 458-3103 Precleaner Kit (Cab Powered) For Certain 988K and 986K Wheel Loaders {1055, 1408}
735C and 745C Articulated Trucks Plate Locations and Film Locations
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Counterweight and Mounting