424B Backhoe Loader Machine Systems Caterpillar


Piston Pump - Install

Usage:

424B JRN

Installation Procedure




    Illustration 1g03686544

    Note: Typical example




    Illustration 2g03693904

  1. Attach suitable lifting device onto piston pump (8). The weight of piston pump (8) is approximately 29 kg (64 lb). Raise piston pump (8) from the ground. Position piston pump (8) onto the machine and install bolts (7).



    Illustration 3g03693902

  1. Install hose assembly (6) and four bolts (5) .



    Illustration 4g03693899

  1. Install hose assemblies (4) and (3) .

  1. Install hose (2) and tighten clamp (1)

  1. Fill the hydraulic tank. Refer to Operation and Maintenance Manual, SEBU9920, "Hydraulic System Oil - Change".

End By: Install the floorplate.

Caterpillar Information System:

725C2 and 730C2 Articulated Truck Machine System Cab - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
416F2, 420F2 and 430F2 Backhoe Loaders Hydraulic Oil Sample - Obtain
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Fuel Tank Water and Sediment - Drain
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Engine Oil and Filter - Change
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Pump and Mounting
424B Backhoe Loader Machine Systems Piston Pump - Remove
424B Backhoe Loader Machine Systems Bank Valve (Loader) - Install
794 AC Off-Highway Truck Machine Systems Cab Mounting
834H Wheel Dozer and 836H Landfill Compactor Maintenance Interval Schedule
3516B Generator Set Engines with Dynamic Gas Blending Engine Has Early Wear
794 AC Off-Highway Truck Machine Systems Axle Mounting
C3.4B Industrial Engine Diesel Exhaust Fluid - Fill
794 AC Off-Highway Truck Machine Systems Hoist Cylinder and Mounting
140H, 143H, 160H and 163H Motor Graders Power Train Electronic Control System Data Link
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Differential and Bevel Gear - Remove and Install - Rear Axle
140H, 143H, 160H and 163H Motor Graders Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
C3.4B Industrial Engine Product Lifting
140H, 143H, 160H and 163H Motor Graders Power Train Electronic Control System Wiring Harness (Open Circuit) - Test
2014/08/19 Washer Bottle Hose Troubleshooting Instruction Is Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7308}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic Oil Sample - Obtain
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential Lock - Check
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic System Oil - Change
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Operator Control Switch (Switch to Ground) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.