Turbocharger Heat Shield
Usage:
Remove Turbocharger Heat Shield
1. Drain the jacket water cooling system.
2. Disconnect the two water outlet lines (1) from top of heat shield.
3. Remove the heat shield-to-exhaust pipe mounting bolts (2).
4. Remove the air cleaner housing support braces mounting bolts (3), and swing braces away from heat shield.
5. Disconnect the two heat shield water inlet lines (4) and (5).
6. Remove the turbocharger heat shield - weight 40 lbs. (18 kg).
Install Turbocharger Heat Shield
1. Position the heat shield on engine, and install the four mounting bolts.
2. Position the air cleaner housing support braces, and install mounting bolts.
3. Connect the two water outlet lines to top of heat shield.
4. Connect the two water inlet lines to bottom of heat shield.
5. Fill the jacket water cooling system.
Caterpillar Information System:
D346 Marine Engine Exhaust Manifolds
D346 Marine Engine Exhaust Manifold Heat Shields
D346 Marine Engine Air Cleaner Housings
D346 Marine Engine Fuel Injection Pump Housing And Governor
D346 Marine Engine Variable Timing Unit
D346 Marine Engine Governor
D346 Marine Engine Fuel Ratio Control
D346 Marine Engine Fuel Injection Lines
D346 Marine Engine Fuel Transfer Pump
D346 Marine Engine Front Timing Gear Plate And Idler Gear
D346 Marine Engine Front Balancer And Idler Gear
D346 Marine Engine Front Timing Gear Cover
D346 Marine Engine Turbochargers
D346 Marine Engine Aftercooler Cores
D346 Marine Engine Valve Covers
D346 Marine Engine Fuel Injection Valves
D346 Marine Engine Precombustion Chambers
D346 Marine Engine Right Camshaft Housing
D346 Marine Engine Left Camshaft Housing
D346 Marine Engine Right Cylinder Head Assembly
D346 Marine Engine Left Cylinder Head Assembly
D346 Marine Engine Spacer Plates
D346 Marine Engine Pistons
D346 Marine Engine Cylinder Liners