New High-Temperature Fasteners Are Used with the Exhaust Lines on C175 Off-Highway Truck Engines {1061, 7553}
- Off-Highway Truck:
- 793F (S/N: SND1-UP; SSP1-UP)
- 795FSeries AC (S/N: ERM1-UP)
- 797F (S/N: LAJ1-UP)
Description of Change: The new high-temperature fasteners are more durable in the heat of the exhaust lines than the previously used fasteners.
Adaptable To: The new fasteners and the previous fasteners are identified in Table 1 and in Illustration 1.
Show/hide table
| Item | New Fasteners | Previous Fasteners |
| 1 | 6V-7687 Locknut | 6V-8149 Nut |
| 2 | 369-2483 High Temperature Bolt | 8T-0372 Bolt 6V-5696 Bolt |
Rework Instructions
Show/hide table
| Required Parts | |
| Part | Qty |
| 6V-8336 Bolts | 8 |
| 369-2483 High Temperature Bolts | 8 |
| 6V-7687 Locknuts | 16 |
Show/hide table
 | |
| Illustration 1 | g02771260 |
(1) 6V-7687 Locknuts (2) 369-2483 High Temperature Bolts | |
- Remove the original 6V-8336 Bolts and 6V-8149 Nuts from the tops of the exhaust manifolds. Keep the washers for reuse. Discard the original bolts and nuts.
- Install new 6V-8336 Bolts along with the original washers and install the new 6V-7687 Locknuts (1) .
Caterpillar Information System:
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Machine Frame and Mounting
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - C3.3B
793F Series AC Off-Highway Truck Machine Systems Front Wheel Bearings - Install
793F Series AC Off-Highway Truck Machine Systems Front Wheel Bearings - Remove
789D Off-Highway Truck Gear Pump (Rear Axle Oil) - 2 Section
Relay Inspection and Replacement on Certain Gensets{4460, 4493} Relay Inspection and Replacement on Certain Gensets{4460, 4493}
789D Off-Highway Truck Gear Pump (Rear Axle Oil) - 1 Section
521B and 522B Track Feller Bunchers TA2 Technical Inspection{7000, 753T} 521B and 522B Track Feller Bunchers TA2 Technical Inspection{7000, 753T}
CB64B, CB66B and CB68B Vibratory Asphalt Compactors Vibratory Control
R3000H Load Haul Dump Lift Arm Support Pins
R3000H Load Haul Dump Solenoid Valve (Parking Brake) - Test
R3000H Load Haul Dump Oil Filter (Pilot) - Replace
789D Off-Highway Truck Oil Filter (Rear Axle)
2011/12/01 New Brake Pressure Warning Switch is Now Used on Certain Backhoe Loaders {4269}
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders MID 039 - CID 3709 - FMI 03
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders MID 039 - CID 3709 - FMI 05
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders MID 039 - CID 3709 - FMI 06
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders MID 039 - CID 2529 - FMI 02
789D Off-Highway Truck Flow Control and Relief Valve (Rear Axle Oil)
793F Off-Highway Truck Chassis Electronic Control System Command For Hauling General Information
2011/11/16 Improved Air Conditioner Compressor Bracket on 793F, 795F, and 797F Off-Highway Trucks {1802}
2011/11/23 A New Limit Switch Assembly for the Brake Pedal is Now Available on Certain M Series Motor Graders {1265, 3191, 4269}
793F Off-Highway Truck Chassis Electronic Control System Command For Hauling System Operation
2011/11/23 Improved Manufacturing Process for Body Pivot Pins Now Used on Certain Articulated Trucks . {7250, 7258, 7424}