Bearing Surface (Journal) For Connecting Rods
Usage:
(A) Measurement ... 6.045 mm (.2380 in)
(B) Measurement ... 6.045 mm (.2380 in)
(1) Diameter of the connecting rod journals (new) ... 76.180 ± 0.020 mm (2.9992 ± .0008 in)
Difference in diameter at (A) and (B) must not be more than ... 0.015 mm (.0006 in)
(2) Radius ... 4.74 ± 0.20 mm (.187 ± .008 in)
NOTE: Radius must blend smoothly (have no sharp edges) with the machined surfaces of the journals.
(3) Width of journals ... 47.668 ± 0.140 mm (1.877 ± .006 in)
Caterpillar Information System:
G3306 TRUCK ENGINE Bearing Surface (Journal) For Main Bearings
G3306 TRUCK ENGINE Crankshaft
G3306 TRUCK ENGINE Belt Tension Chart
G3306 TRUCK ENGINE Piston And Rings
G3306 TRUCK ENGINE Connecting Rod
G3306 TRUCK ENGINE Cylinder Liner Projection
G3306 TRUCK ENGINE Cylinder Liner
G3306 TRUCK ENGINE Camshaft Bearings
G3306 TRUCK ENGINE Cylinder Block
G3306 TRUCK ENGINE Water Temperature Regulator
G3306 TRUCK ENGINE Water Pump
G3306 TRUCK ENGINE Engine Oil Pressure
G3306 TRUCK ENGINE Connecting Rod And Main Bearings
G3306 TRUCK ENGINE Timing Gear Cover
G3306 TRUCK ENGINE Crankshaft Pulley
G3306 TRUCK ENGINE Trunnion
G3306 TRUCK ENGINE Flywheel
G3306 TRUCK ENGINE Flywheel Housing
G3306 TRUCK ENGINE Flywheel Runout
G3306 TRUCK ENGINE Flywheel Housing Runout
G3306 TRUCK ENGINE Flywheel Housing Bore
G3306 TRUCK ENGINE Starting Motor
G3306 TRUCK ENGINE Systems Operation
G3306 TRUCK ENGINE Testing And Adjusting