Bearing Surface (Journal) For Main Bearings
Usage:
(A) Distance from the centerline of the main bearing journal ... 14.262 mm (.5615 in)
(B) Dimension from line (A) ... 28.524 mm (1.1230 in)
(1) Diameter of the main bearing journal at (A) and (B) (new) ... 88.880 ± 0.020 mm (3.4992 ± .0008 in)
Difference in the diameter at (A) and (B) must not be more than ... 0.015 mm (.0006 in)
(2) Radius ... 4.74 ± 0.20 mm (.187 ± .008 in)
NOTE: Radius must blend smoothly (have no sharp edges) with the machined surfaces of the journals.
(3) Width of rear journal ... 40.475 ± 0.140 - 0.064 mm (1.594 + .006 - .003 in)
(4) Width of all journals except rear (maximum) ... 45.16 mm (1.78 in)
Caterpillar Information System:
G3306 TRUCK ENGINE Crankshaft
G3306 TRUCK ENGINE Belt Tension Chart
G3306 TRUCK ENGINE Piston And Rings
G3306 TRUCK ENGINE Connecting Rod
G3306 TRUCK ENGINE Cylinder Liner Projection
G3306 TRUCK ENGINE Cylinder Liner
G3306 TRUCK ENGINE Camshaft Bearings
G3306 TRUCK ENGINE Cylinder Block
G3306 TRUCK ENGINE Water Temperature Regulator
G3306 TRUCK ENGINE Water Pump
G3306 TRUCK ENGINE Engine Oil Pressure
G3306 TRUCK ENGINE Oil Breather Cap
G3306 TRUCK ENGINE Bearing Surface (Journal) For Connecting Rods
G3306 TRUCK ENGINE Connecting Rod And Main Bearings
G3306 TRUCK ENGINE Timing Gear Cover
G3306 TRUCK ENGINE Crankshaft Pulley
G3306 TRUCK ENGINE Trunnion
G3306 TRUCK ENGINE Flywheel
G3306 TRUCK ENGINE Flywheel Housing
G3306 TRUCK ENGINE Flywheel Runout
G3306 TRUCK ENGINE Flywheel Housing Runout
G3306 TRUCK ENGINE Flywheel Housing Bore
G3306 TRUCK ENGINE Starting Motor
G3306 TRUCK ENGINE Systems Operation