Air Cleaner
Usage:
Remove & Install Air Filter Element & Air Cleaner Assembly
1. Disconnect and open clamps (1). Remove air cleaner cover (2).
2. Remove four screws (3) and remove air cleaner element (4).
3. Attach a suitable lifting device (5). Loosen two clamps (7) and remove intake hose (8). Remove mounting bolts (9) and remove air cleaner assembly (6).
4. For installation procedure reverse steps 1 thru 3 and in Step 2. Replace air cleaner element (4) if necessary.
Caterpillar Information System:
HEINZMAN GOVERNOR (3600 GENERATOR SET APPLICATIONS) Service Procedures
HEINZMAN GOVERNOR (3600 GENERATOR SET APPLICATIONS) Troubleshooting Heinzmann Electronic Speed Governors
HEINZMAN GOVERNOR (3600 GENERATOR SET APPLICATIONS) Testing And Adjusting
HEINZMAN GOVERNOR (3600 GENERATOR SET APPLICATIONS) Systems Operation
CONTROL PANEL (STATUS-TIMING) FOR 3500 SPARK IGNITED ENGINES Testing and Adjusting
CONTROL PANEL (STATUS-TIMING) FOR 3500 SPARK IGNITED ENGINES Systems Operation
ETR ELECTRICAL PROTECTION SYSTEM Service Procedures
ETR ELECTRICAL PROTECTION SYSTEM Troubleshooting Full Protection System - Energize To Run System - Oil Pressure, Water Temperature, Overspeed Protection
ETR ELECTRICAL PROTECTION SYSTEM Electric Protection System Functional Tests
ELECTRICAL PROTECTION SYSTEM ENERGIZE TO RUN (SI-ETR) Systems Operation
3208 INDUSTRIAL & MARINE ENGINES Testing & Adjusting
3208 INDUSTRIAL & MARINE ENGINES Systems Operation
3412 GENERATOR SET ENGINES Aftercooler Core
3412 GENERATOR SET ENGINES Turbocharger (Left Side & Rear) STA
3412 GENERATOR SET ENGINES Exhaust Manifold
3412 GENERATOR SET ENGINES Valve Covers
3412 GENERATOR SET ENGINES Rocker Shaft Assembly
3412 GENERATOR SET ENGINES Valve Lifters & Push Rods
3412 GENERATOR SET ENGINES Alternator
3412 GENERATOR SET ENGINES Cylinder Head
3412 GENERATOR SET ENGINES Valves
3412 GENERATOR SET ENGINES Valve Guides
3412 GENERATOR SET ENGINES Bridge Dowels
3412 GENERATOR SET ENGINES Valve Seat Inserts