Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3073}
- Integrated Toolcarrier:
- IT62H (S/N: M5G1-UP)
- Wheel Loader:
- 950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)
- 962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP; K6K1-UP)
Show/hide table
Transmission Pressures for the 950H and 962H Wheel Loaders and the IT62H Integrated Toolcarrier (1)     | |
Pressure Tap     | Specification     |
(1) Number 1 clutch pressure     | 2758 ± 140 kPa (400 ± 20 psi)     |
(2) Number 2 clutch pressure     | 2758 ± 140 kPa (400 ± 20 psi)     |
(3) Number 3 clutch pressure     | 2758 ± 140 kPa (400 ± 20 psi)     |
(4) Number 4 clutch pressure     | 2758 ± 140 kPa (400 ± 20 psi)     |
(5) Number 5 clutch pressure     | 2310 ± 140 kPa (335 ± 20 psi)     |
(6) Number 6 clutch pressure     | 2758 ± 140 kPa (400 ± 20 psi)     |
(7) Torque converter inlet pressure     | 925 ± 50 kPa (135 ± 7.5 psi)     |
(8) Torque converter outlet pressure     | 415 ± 140 kPa (60 ± 20 psi)     |
(9) Transmission lubrication pressure     | 105 kPa (15 psi) (minimum)     |
(10) Transmission oil pump pressure     | 2758 ± 70 kPa (400 ± 10 psi)     |
Show/hide table
( 1 ) | Oil pressure at high idle. |
Caterpillar Information System:
2006/06/19 Correction to Specifications , "Torque Convertor and Transmission Pressures" {3030, 3073, 3101}
The Procedure to Adjust the Neutral Sensor for the Propel System on Paving Compactors {5705, 5737} The Procedure to Adjust the Neutral Sensor for the Propel System on Paving Compactors {5705, 5737}
2007/03/12 Improved Clearance for the Radiator Hose {1351, 1354}
572R Series II Pipelayer Flywheel Lubrication Oil Pressure - Test
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
572R Series II Pipelayer Track - Adjust
2006/06/19 An Improved Torque Sequence Is Used on the Front Suspension Cylinders {7200, 7201}
RM-300 Reclaimer Mixer Machine Systems Piston Pump (Hydraulic Fan) - Install
RM-300 Reclaimer Mixer Machine Systems Piston Pump (Hydraulic Fan) - Remove
3176C Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
RM-300 Reclaimer Mixer Machine Systems Control Valve (Rear Auxiliary Manifold) - Install
RM-300 Reclaimer Mixer Machine Systems Control Valve (Rear Auxiliary Manifold) - Remove
TH580B Telehandler Hydraulic System Accumulator - Test and Charge
C13, C15, and C18 Tier 4 Final Engines Connecting Rod
RM-300 Reclaimer Mixer Machine Systems Piston Motor (Hydraulic Fan) - Remove
416E Backhoe Loader Hydraulic and Steering System Pump Flow - Test
RM-300 Reclaimer Mixer Machine Systems Piston Motor (Hydraulic Fan) - Install
C4.4 Industrial Engine Cleanliness of Fuel System Components
572R Series II Pipelayer Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
416E Backhoe Loader Hydraulic and Steering System Ride Control - Test
3176C Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
572R Series II Pipelayer Transmission Lubrication Oil Pressure - Test
Depth of the Spotface on the Support Assembly on Off-Highway Trucks{7051} Depth of the Spotface on the Support Assembly on Off-Highway Trucks{7051}
C6.6 Engines for Caterpillar Built Machines Crankcase Breather