2006/06/19 Caterpillar

Integrated Toolcarrier:

IT62H (S/N: M5G1-UP)

Wheel Loader:

950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)

962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP; K6K1-UP)

Specifications, RENR8864, "950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train", "Torque Converter and Transmission Pressures". Disregard this article. Use the replacement article that follows.

Illustration 1	g01099999
Location of the remote pressure taps

Illustration 2	g01165044
Remote pressure taps

The following pressures should be checked with the engine at high idle. The transmission oil should be at the normal operating temperature of 80 °C (176 °F).

(1) Transmission pressure for clutch 1 ... 2758 ± 140 kPa (400 ± 20 psi)

(2) Transmission pressure for clutch 2 ... 2758 ± 140 kPa (400 ± 20 psi)

(3) Transmission pressure for clutch 3 ... 2758 ± 140 kPa (400 ± 20 psi)

(4) Transmission pressure for clutch 4 ... 2758 ± 140 kPa (400 ± 20 psi)

(5) Transmission pressure for clutch 5 ... 2310 ± 140 kPa (335 ± 20 psi)

(6) Transmission pressure for clutch 6 ... 2758 ± 140 kPa (400 ± 20 psi)

(7) Torque converter inlet pressure ... 925 ± 50 kPa (135 ± 7.5 psi)

(8) Torque converter outlet pressure ... 415 ± 140 kPa (60 ± 20 psi)

(9) Minimum pressure for the transmission lubrication oil ... 105 kPa (15 psi)

(10) Transmission Pump Pressure ... 2758 ± 70 kPa (400 ± 10 psi)