New Instruction Card Available For 6V87 Valve Stem Gauge
Usage:
A new instruction card is available for the 6V87 Valve Stem Gauge. The new card is easier to understand and faster to use. Information for inlet and exhaust valves is shown separately. Also, information for later valves has been added. The new instruction card, Form SEHS7758-01, is the same size as the former card, and can be used as a direct replacement.
Caterpillar Information System:
1982/09/22 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22 Water Cooled Turbocharger Now Used
1982/09/22 Caterpillar-Built Industrial Engines Available In New Machines
1982/09/22 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22 Make Sure Generator Leads Do Not Move Against Frame
1982/09/22 Induction Bearing Heater Available
1982/08/25 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives
1982/08/25 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/08/25 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter
1982/08/25 Change Made To Fuel Nozzle Assembly; New Bleed Screw Used
1982/08/25 New Time Delay Conversion Groups Available
1982/08/25 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/09/22 New Torque Specification For Fuel Injection Pump Bushing
1982/09/22 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger
1982/09/22 Improved Inlet And Exhaust Valves
1982/09/22 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/22 Dial Bore Gauge And Size Setting Fixture Available
1982/09/22 Service Life Of Slip Rings Can Be Extended
1982/09/22 New Rocker Arm Assemblies Used
1982/09/22 New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/22 Improved Idler Pulley Assemblies For 3208 Engines
1982/09/22 New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests
1982/09/22 New Bearing Used In Air Starting Motor
1982/09/22 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers