Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
Usage:
3145, 3150, 3160, 3208 Industrial And Generator Set Engines;
3160, 3208 Marine Engines
Two oil change kits are now available for the above engines.
The 6V3690 Oil Change Kit has two 9N5680 Oil Filters and a one-half pint bottle of 6V3542 Cooling System Conditioner. The 9N5680 Oil Filter has a bypass valve built in the filter. This kit is used on earlier engines as shown in the chart.
The 6V5875 Oil Change kit has two 8N9586 Oil Filters and a one-half pint bottle of 6V3542 Cooling System Conditioner. The 8N9586 Oil Filter has no bypass valve; the bypass valve is in the filter base on the engine. This kit is used on later engines as shown in the chart.
Caterpillar Information System:
1982/09/22 Improved Inlet And Exhaust Valves
1982/09/22 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger
1982/09/22 New Torque Specification For Fuel Injection Pump Bushing
1982/09/22 New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22 Water Cooled Turbocharger Now Used
1982/09/22 Caterpillar-Built Industrial Engines Available In New Machines
1982/09/22 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22 Make Sure Generator Leads Do Not Move Against Frame
1982/09/22 Induction Bearing Heater Available
1982/08/25 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives
1982/08/25 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/09/22 Dial Bore Gauge And Size Setting Fixture Available
1982/09/22 Service Life Of Slip Rings Can Be Extended
1982/09/22 New Rocker Arm Assemblies Used
1982/09/22 New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/22 Improved Idler Pulley Assemblies For 3208 Engines
1982/09/22 New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests
1982/09/22 New Bearing Used In Air Starting Motor
1982/09/22 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers
1982/09/22 Metal Particles On Magnetic Pick-Up Can Permit Engine RPM To Vary; Move Pick-Up To A New Location
1982/09/22 New Tool Makes Installation Of Carbon Stop Seals Easier
1982/09/22 Reusability Of Camshaft Rollers And Roller Followers
1982/09/22 Improved Lubrication System