1982/04/07 Caterpillar


Caterpillar Electric Starting Motors

Usage:


3306 Industrial Engines

SUPPLEMENT: 09/22/82

ENGINE NEWS, APRIL 7, 1982, PAGE 3.

In the article "Caterpillar Electric Starting Motors" some of the information in Chart B has changed. Changes were made to Items 1, 4, 7, 8 and 12. An additional part number was added to Item 1. One of the part numbers was removed from Item 4. Items 7, 8 and 12 are not available for parts service.

--------------- END SUPPLEMENT ---------------

Some of the above engines are equipped with either a Caterpillar, Delco-Remy or Prestolite starting motor and solenoid. If a replacement starting motor group is ordered, it is possible to get any one of these starting motor groups. For each individual engine the Caterpillar, Delco-Remy, and Prestolite starting motor groups are interchangeable (direct replacements). But, the parts within these three groups are not interchangeable.

The current Parts Books do not show the Caterpillar starting motor groups or their individual components.


Location of parts.

Identification of the Caterpillar starting motors can be made by either of the numbers shown in Chart A.

Chart B shows the separate components of the Caterpillar starting motors. Chart C shows the repair kits that are available for these starting motors.

Caterpillar Information System:

1982/04/07 Use The 6V6059 Microlite With The 6V2196 Inspection Microscope
1982/04/07 Engine Replacement
1982/04/07 Location Of Sending Unit Changed To Improve Accuracy Of Water Temperature Indication
1982/04/07 Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/03/17 Brass Plug Used To Prevent Corrosion
1982/03/17 New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1982/03/17 Heavy Duty Air Cleaner Available, With Precleaner And Automatic Dust Ejector
1982/03/17 Improved Bearing Used In Rear Power Takeoff Groups
1982/03/17 New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17 Correct Lubrication Procedure Will Prevent Damage To Fan Drive
1982/03/17 New Adapters And O-Ring Seals Used In Aftercooler Group
1982/03/17 New Diaphragm Used In Fuel Ratio Control
1982/04/07 List Of Service Publications
1982/04/07 Use 5P5195 Fuel Line Wrench Correctly
1982/04/07 New Marine Gear Groups Have New Clutch Plates
1982/04/07 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07 New Oil Pump Outlet Elbow Is Stronger
1982/04/07 Improved Valve Cover Seal Used
1982/04/07 Carbon Build-Up In Combustion And Inlet Areas
1982/05/12 Fuel Rack Slots Have Improved Wear Resistance
1982/05/12 List Of Service Publications
1982/05/12 5P4812 Gauge Group Components Available Separately
1982/05/12 Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/12 Warranty Period Extended
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.