New Service Tools Available
Usage:
The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.
Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.
See your Caterpillar dealer for additional information about these tools.
Caterpillar Information System:
1984/08/06 Use Vacuum Tester For Quality Control Check Of Water Pump Seal
1984/08/06 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1984/06/27 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1984/06/27 List of Service Publications
1984/06/27 Drain Line Added To Reduce Pressure In BrakeSaver Housing
1984/06/27 New Rear Crankshaft Seal Group Used
1984/06/27 New Ammeter And Ammeter Calibrator Group Available
1984/06/27 New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position
1984/06/27 Valve Springs Must Be Removed Before Fuel Injection Nozzle Adapter Assembly Is Removed
1984/06/27 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets
1984/05/23 3406 Remanufactured Truck Engines Available
1984/05/23 High Levels Of Soot In The Oil; Make Sure Air Fuel Ratio Control Operates Correctly
1984/08/06 Use Caution When Handling Components That Contain Asbestos
1984/08/06 New Relief Valve Guide Used In Oil Pump
1984/08/06 New Disassembly And Assembly Tools Available For Fuel Ratio Controls
1984/08/06 List Of Service Publications
1984/08/06 FT1886 Valve Spring Compressor Group Available
1984/08/06 Alternator Available For General Use
1984/08/06 Installation Instructions For Turbocharger Bearing Kit
1984/09/26 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks
1984/09/26 Improved Cylinder Heads And Valve Covers Used
1984/09/26 Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26 Change To Maintenance Interval For Valve Lash Adjustment
1984/09/26 New Main And Connecting Rod Bearings Have Copper Bond Material