Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
Usage:
Fuel setting and air fuel ratio control adjustment tools for 3406B Engines are currently part of the 6V6070 Governor Adjusting Tool Group. This tool group also has tools for 3204 and 3300 Series Engines with the New Scroll Fuel System. If only the fuel setting and air fuel ratio control adjustment tools for 3406B Engines are needed, order the separate parts shown in the chart.
Caterpillar Information System:
1984/04/04 Remanufactured Undersize Crankshafts Are Available
1984/04/04 Service Tools With Dual Scale (U.S. Standard And Metric) Will Again Be Available
1984/04/04 6V7925 Fuel Rate Indicator Is Available
1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores
1984/04/04 List of Service Publications
1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/04/04 Parts Service Engine Information Plate Available
1984/02/15 List Of Service Publications
1984/02/15 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters
1984/02/15 3406B Truck Engines Available
1984/02/15 Parts Service Information For Pistons
1984/02/15 Remanufactured Cylinder Head Assemblies
1984/04/04 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders
1984/04/04 Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/04/04 New Aftercooler Hose Clamp Helps Prevent Leaks
1984/05/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/23 New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23 List Of Service Publications
1984/05/23 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products
1984/05/23 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/23 New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/23 New Oil Filter Base Assembly Used In Filter Base Group
1984/05/23 Remanufactured Oil Pumps Available
1984/05/23 Improved Cylinder Head Gasket