Remanufactured Oil Pumps Available
Usage:
3406 And 3306 Truck Engines
Remanufactured oil pumps are now available for the above engines. These oil pumps are remanufactured to current engineering specifications and they have the same warranty as new oil pumps.
These remanufactured oil pumps are currently only available in the United States and Canada.
Caterpillar Information System:
1984/05/23 New Oil Filter Base Assembly Used In Filter Base Group
1984/05/23 New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/23 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/23 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products
1984/05/23 List Of Service Publications
1984/05/23 New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/04/04 New Aftercooler Hose Clamp Helps Prevent Leaks
1984/04/04 Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/04/04 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders
1984/04/04 Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/04 Remanufactured Undersize Crankshafts Are Available
1984/05/23 Improved Cylinder Head Gasket
1984/05/23 High Levels Of Soot In The Oil; Make Sure Air Fuel Ratio Control Operates Correctly
1984/05/23 3406 Remanufactured Truck Engines Available
1984/06/27 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets
1984/06/27 Valve Springs Must Be Removed Before Fuel Injection Nozzle Adapter Assembly Is Removed
1984/06/27 New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position
1984/06/27 New Ammeter And Ammeter Calibrator Group Available
1984/06/27 New Rear Crankshaft Seal Group Used
1984/06/27 Drain Line Added To Reduce Pressure In BrakeSaver Housing
1984/06/27 List of Service Publications
1984/06/27 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1984/08/06 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks