Remanufactured Undersize Crankshafts Are Available
Usage:
All Caterpillar-built Engines
Remanufactured crankshafts are now available for almost all Caterpillar-built engines. These remanufactured crankshafts have had both the rod and main journals ground undersize the same amount. All these crankshafts can still be ground to the next undersize dimension in the future, if needed. With all remanufactured crankshafts it is now necessary to return a core. Remember remanufactured crankshafts are not serviced with bearings, so it will be necessary to order the correct bearings for the crankshaft.
Caterpillar Information System:
1984/04/04 Service Tools With Dual Scale (U.S. Standard And Metric) Will Again Be Available
1984/04/04 6V7925 Fuel Rate Indicator Is Available
1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores
1984/04/04 List of Service Publications
1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/04/04 Parts Service Engine Information Plate Available
1984/02/15 List Of Service Publications
1984/02/15 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters
1984/02/15 3406B Truck Engines Available
1984/02/15 Parts Service Information For Pistons
1984/02/15 Remanufactured Cylinder Head Assemblies
1984/02/15 New Service Tools Available
1984/04/04 Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/04 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders
1984/04/04 Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/04/04 New Aftercooler Hose Clamp Helps Prevent Leaks
1984/05/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/23 New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23 List Of Service Publications
1984/05/23 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products
1984/05/23 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/23 New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/23 New Oil Filter Base Assembly Used In Filter Base Group
1984/05/23 Remanufactured Oil Pumps Available