Bucket Linkage Bearings and Seals - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 350-7768 | Electric Hydraulic Pump Gp | 1 |
6V-3175 | Double Acting Cylinder | 1 | |
4C-9634 | Puller Stud | 1 | |
9U-6832 | Nut | 1 | |
5P-8625 | Receiving Sleeve | 1 | |
1P-1837 | Bearing Puller Adapter | 1 | |
B | 350-7768 | Electric Hydraulic Pump Gp | 1 |
6V-3175 | Double Acting Cylinder | 1 | |
4C-9634 | Puller Stud | 1 | |
9U-6832 | Nut | 1 | |
4K-0684 | Hard Washer | 1 | |
5P-8625 | Receiving Sleeve | 1 | |
9U-5336 | Bearing Puller Adapter | 1 |
Start By:
- Remove the bucket linkage.
- Remove lip seals (1) from the power link (2).
Show/hide table
Illustration 2 g01213106 Typical Example - Attach a suitable lifting device to Tooling (A), as shown.
- Use Tooling (A) to remove sleeve bearing (3) from the closed end of the power link.
- Use Tooling (A) to remove the sleeve bearing from the opposite side of the power link.
- Remove the sleeve bearings from the open end of the power link.
Show/hide table
Illustration 3 g00698407 - Remove lip seals (4) from the bore for the idler link in the stick.
Show/hide table
Illustration 4 g00698417 - Attach a suitable lifting device to Tooling (B), as shown.
- Use Tooling (B) to remove the sleeve bearing from the stick.
- Use Tooling (B) to remove the sleeve bearing from the opposite side of the stick.
Show/hide table
Illustration 1 | g00698265 |
Caterpillar Information System:
A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274} A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403}
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269} Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400} New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400}
797F Tier 4 Off-Highway Truck Engine Supplement Temperature Sensor (Exhaust Inlet) - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Remove - Remote Mount
320D3 Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
PM820, PM822, and PM825 Cold Planer Conveyor Belt Tension and Tracking - Adjust
320D3 Hydraulic Excavator Machine Systems Pump Drive Coupling - Remove and Install
C18 Generator set and C18 Marine Engines Fuel Manifold - Install
C175-16 Marine Engines Oil Mist Detector - Clean
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Remote Mount
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490} Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620} New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620}
797F Tier 4 Off-Highway Truck Engine Supplement Pressure Sensor (Exhaust Inlet) - Remove and Install
PM820, PM822, and PM825 Cold Planer Prepare the Machine for Maintenance
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankcase Breather - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel and Auxiliary Water Pump Drive - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Engine Mounted Oil Filtered Base
320D3 Hydraulic Excavator Engine Supplements Exhaust Elbow - Remove and Install
C18 Generator set and C18 Marine Engines Fuel Pressure Sensor - Remove and Install
320D3 and 323D3 Excavators Machine System Specifications Final Drive