Maintenance Interval Schedule - Auxiliary
Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.
Fuel System - Prime
Generator - Dry
Generator Load - Check
Generator Set - Test
Generator Set Alignment - Check
Battery Electrolyte Level - Check
Electrical Connections - Check
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel System Primary Filter (Water Separator) Element - Replace
Generator - Inspect
Jacket Water Heater - Check
Power Factor - Check
Standby Generator Set Maintenance Recommendations
Voltage and Frequency - Check
Walk-Around Inspection
Belts - Inspect/Adjust/Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Crankshaft Vibration Damper - Inspect
Engine - Clean
Engine Mounts - Inspect
Engine Oil Sample - Obtain
Engine Protective Devices - Check
Engine Valve Rotators - Inspect
Fuel System Secondary Filter - Replace
Generator Set Vibration - Inspect
Hoses and Clamps - Inspect/Replace
Radiator - Clean
Starting Motor - Inspect
Stator Lead - Check
Varistor - Check
Water Pump - Inspect
Turbocharger - Inspect
The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.
Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.
When Required
Battery - ReplaceFuel System - Prime
Generator - Dry
Generator Load - Check
Generator Set - Test
Generator Set Alignment - Check
Every Week
Battery Charger - CheckBattery Electrolyte Level - Check
Electrical Connections - Check
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel System Primary Filter (Water Separator) Element - Replace
Generator - Inspect
Jacket Water Heater - Check
Power Factor - Check
Standby Generator Set Maintenance Recommendations
Voltage and Frequency - Check
Walk-Around Inspection
Overhaul
Overhaul ConsiderationsEvery 6 Months
Generator Lead (Round Cable) - CheckEvery Year
Alternator - InspectBelts - Inspect/Adjust/Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Crankshaft Vibration Damper - Inspect
Engine - Clean
Engine Mounts - Inspect
Engine Oil Sample - Obtain
Engine Protective Devices - Check
Engine Valve Rotators - Inspect
Fuel System Secondary Filter - Replace
Generator Set Vibration - Inspect
Hoses and Clamps - Inspect/Replace
Radiator - Clean
Starting Motor - Inspect
Stator Lead - Check
Varistor - Check
Water Pump - Inspect
Every 3 Years
Rotating Rectifier - CheckTurbocharger - Inspect
Caterpillar Information System:
C12.9 Marine Engines Alternator - Remove and Install
C1.7 and C2.2 Industrial Engine Speed/Timing - Test
C175-20 Locomotive Engine Fuel Pressure Is High
C175-16 Locomotive Engine Exhaust Differential Temperature Is High
G3508J, G3516J, and G3520J Engines Aftercooler - Remove and Install
C175-20 Locomotive Engine DEF Tank Level Is Low
XQ570 Rental Generator Set Safety Messages
C175-16 Locomotive Engine Crankcase Pressure Is High
Energy Storage System Fuse - Replace
Energy Storage System Current Sensor - Replace
Energy Storage System Contactor - Replace
Energy Storage System Carbon Dioxide (CO2) Scrubber - Replace
G3512 Generator Set Engines Detonation - Test
G3512 Generator Set Engines Electrical Power Supply - Test
C175-16 Locomotive Engine Fuel Temperature Is High
G3512 Generator Set Engines Exhaust Temperature Is High
G3512 Generator Set Engines Exhaust Temperature Is Low
G3512 Generator Set Engines Fuel Metering Valve - Test - TecJet Valve
C175-16 Locomotive Engine Oil Filter Differential Pressure Problem
Cat® Command For Hauling MID 039 - CID 0839 - FMI 02
C175-16 Locomotive Engine NOx Sensor - Test
G3516 TA Engine Ignition Secondary - Test
G3516 TA Engine Intake Manifold Air Temperature Is High
G3516 TA Engine Oil Filter Differential Pressure Problem