3516C Locomotive Engines Selective Catalytic Reduction Caterpillar


Component Location

Usage:

- LAS

Dosing Control Cabinet




Illustration 1g03541367

Diesel Exhaust Fluid (DEF) dosing control cabinet

(1) Engine harness

(2) Main DEF tank harness

(3) CEM harness

(4) Power to cabinet

(5) DEF to injector

(6) Air to injector

(7) Air supply to cabinet

(9) DEF return to main tank

(10) DEF supply from main tank

Dosing Control Cabinet Interior Components




Illustration 2g03540080

Control Cabinet interior

(1) Connector A-C9 (J1)

(2) Connector A-C1 (J2)

(3) SCR system ECM

(4) Cabinet air temperature sensor

(5) Power converter

(6) Local CAN resistor

(7) DEF pump heater

(8) Global CAN resistor

(9) Refer to illustration 3




Illustration 3g03541146

Detail view front of control cabinet

(1) DEF tank heater breaker

(2) Pump breaker

(3) Terminal block (AC power)

(4) Terminal block (AC power)

(5) Terminal block (ground)

(6) DEF pressure sensor

(7) Air assist pressure sensor

(8) DEF main tank return valve (solenoid)

(9) DEF main tank return valve (pneumatic)

(10) DEF manifold heater

(11) DEF manifold

(12) DEF manifold temperature sensor

(13) Air pressure regulator

(14) Air assist valve (solenoid)

(15) Relay for DEF manifold heater

(16) Connector for CEM (A-C3)

(17) Connector for engine (A-C2)

(18) Connector for tank (A-C13)

(19) Relay for electrical supply side of heated DEF line

(20) Relay for electrical return side of heated DEF line

Clean Emissions Module (CEM) for the Progress Rail




Illustration 4g03507672

Top side view

(1) Pressure measurement location (after DOC)

(2) Pressure measurement location (before DOC)

(3) Temperature measurement location (Outlet #2)

(4) NOx measurement location (Outlet #2)

(5) Temperature measurement location (Intake #2)

(6) NOx measurement location (Intake)

(7) Temperature measurement location (Intake #1)

(8) Pressure measurement location (after DOC)

(9) Pressure measurement location (before DOC)

(10) Temperature measurement location (Outlet #1)

(11) NOx measurement location (Outlet #1)

(12) Intake #1 NOx sensor assembly

(13) Outlet #2 NOx sensor assembly

(14) Outlet #1 NOx sensor assembly

(15) Sensor assembly for temperatures and differential pressure

(16) Sensor assembly for temperatures and differential pressure

Caterpillar Information System:

3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Engine Overspeeds
C3.4B Industrial Engine After Starting Engine
C13 Generator Set Engine Fan Guard - Remove and Install
C13, C15, and C18 Generator Set Engines Turbocharger Oil Lines
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
3516C Locomotive Engines Selective Catalytic Reduction System Overview
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
3516C Locomotive Engines Selective Catalytic Reduction Dosing Control System Operation
374F Excavator Hydraulic System Stick Drift Reduction Valve
C13, C15, and C18 Generator Set Engines Electronic Control Wiring Group
C13, C15, and C18 Generator Set Engines Exhaust Manifold Shield
C13, C15, and C18 Generator Set Engines Fuel Priming Pump and Secondary Fuel Filter
C13 Generator Set Engine Fan Drive - Remove and Install
C9.3 Industrial Engine Plate Locations and Film Locations
EMCPll+ Software Not Compatible With Certain G3400 Engines{4490} EMCPll+ Software Not Compatible With Certain G3400 Engines{4490}
C9.3 Industrial Engine Product Lifting
C13 Generator Set Engine Fan Drive - Disassemble
C13 Generator Set Engine Fan Drive - Assemble
C7.1 Engines Fuel Pressure Sensor - Remove and Install
371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703} 371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703}
C27 and C32 Generator Sets Product Description
2015/08/19 An Improved Seat Belt Group is Now Available for 311 through 390 Excavators {7327}
2013/07/30 New Service Replacement Stator Part Numbers for Certain XQ60, XQ100, and XQ175 Generator Sets are Now Available {4453}
3516C Marine Engines Water Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.