Turbocharger Oil Lines
Show/hide table
Illustration 1 | g03411023 |
Rear view |
Show/hide table
Specification for 257-3111 Turbocharger Oil Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 3L-9689 Washer | Install a washer as a spacer between the two clamps. |
2 | 1 | 112-3540 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
3516C Locomotive Engines Selective Catalytic Reduction System Overview
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
3516C Locomotive Engines Selective Catalytic Reduction Dosing Control System Operation
374F Excavator Hydraulic System Stick Drift Reduction Valve
C13, C15, and C18 Generator Set Engines Electronic Control Wiring Group
C13, C15, and C18 Generator Set Engines Exhaust Manifold Shield
C13, C15, and C18 Generator Set Engines Fuel Priming Pump and Secondary Fuel Filter
2013/08/09 A New Assembly Procedure at the Factory Is Now Used on Certain C18 Marine Engines with a Sea Water Pump and a Bronze Impeller {1000, 1361}
2013/07/24 A New Harness Is Used on Certain C280 Engines {1408}
2013/10/09 New Fuel Filter Wiring Harness Routing Used on Certain C175 Generator Set Engines {1408}
2013/07/24 Improved Engine Harness Assemblies Are Used on Certain 3512C and 3516C Engines {1408}
C13 Generator Set Engine Fan Guard - Remove and Install
C3.4B Industrial Engine After Starting Engine
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Engine Overspeeds
3516C Locomotive Engines Selective Catalytic Reduction Component Location
C13 Generator Set Engine Fan Drive - Remove and Install
C9.3 Industrial Engine Plate Locations and Film Locations
EMCPll+ Software Not Compatible With Certain G3400 Engines{4490} EMCPll+ Software Not Compatible With Certain G3400 Engines{4490}
C9.3 Industrial Engine Product Lifting
C13 Generator Set Engine Fan Drive - Disassemble
C13 Generator Set Engine Fan Drive - Assemble
C7.1 Engines Fuel Pressure Sensor - Remove and Install
371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703} 371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703}