C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Water Pump - Disassemble

Usage:

826K 232

拆解步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
8S-2264  拉拔器总成 
4B-3903 螺栓 
1P-0456 板 
4B-4277 垫圈 
9S-9152  轴承拉拔器总成 
9S-5565  拔销器套筒组件 

开始:

  1. 拆下水泵。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g01021798

  1. 将 O 形密封圈 (10) 从壳体 (1) 上拆下。

  2. 使用工具 (A) 将叶轮 (4) 从轴 (6) 上拆下。

  3. 将螺栓 (3) 从壳体 (1) 上拆下。 将挡圈 (5) 和水泵轴 (6) 从壳体上拆下。

  4. 使用工具 (C) 将齿轮 (2) 从水泵轴 (6) 上拆下。

  5. 使用压具和工具 (B) 将轴承组件 (8) 从水泵轴 (6) 上拆下。

  6. 翻转壳体并将密封总成 (7) 冲出或压出壳体。

  7. 翻转壳体并将唇形密封 (9) 冲出或压出壳体。

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7.1 Marine Generator Set Generator Operation
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C7.1 Marine Generator Set Engine Operation
C18 Generator Set Safety Messages
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C7.1 Industrial Engine Electrical System
C7.1 Marine Generator Set Starting with Jump Start Cables
C7.1 Marine Generator Set Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
2013/06/13 New Fuel Lines Are Available on Certain C18 Marine Engines {1274}
C15 and C18 Engines for Caterpillar Built Machines Power Take-Off Drive Group - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Power Take-Off Drive Group - Assemble
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm - Assemble
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.