Improved Coolant Filler Neck Is Used on Certain C32 Marine Engines {1379}
- Generator Set:
- C32 (S/N: RNX1-UP)
- Marine Engine:
- C32 (S/N: T3T1-UP; RNY1-UP; RNZ1-UP)
Description of Change:
Show/hide table
Illustration 1 | g02949397 |
The new coolant filler necks utilize a stainless steel cup that resists flexing when installing and removing the coolant filler cap.
Adaptable To: The new 283-4432 Neck As is a direct replacement for the current neck assembly. The new neck is adaptable back to the first production of the engine.
Caterpillar Information System:
C175-16 Marine Propulsion Engines Water Lines
C175-16 Marine Propulsion Engines Coolant Level Sensor
C175-16 Marine Propulsion Engines Fuel Injection Lines
C175-16 Marine Propulsion Engines Flywheel Housing Cover
C175-16 Marine Propulsion Engines Cover Group (Front Housing)
C175-16 Locomotive Engine Aftercooler
C175-16 Marine Propulsion Engines Air Lines
C175-16 Marine Propulsion Engines Air Inlet Elbow
C175-16 Marine Propulsion Engines Stub Shaft (Front)
SPF343 and SPF343C Trailer Mounted Pumpers Refill Capacities
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555} Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405} Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405}
The Operator Monitor Group Malfunctions on D Series Excavators and Mobile Hydraulic Power Units{7490} The Operator Monitor Group Malfunctions on D Series Excavators and Mobile Hydraulic Power Units{7490}
SPF343 and SPF343C Trailer Mounted Pumpers Fuel Filter Differential Pressure - Check
SPF343 and SPF343C Trailer Mounted Pumpers Speed Sensor - Clean/Inspect
C175-16 Marine Propulsion Engines Water Lines
C175-16 Marine Propulsion Engines Auxiliary Water Pump - Sea Water
3512C HD Locomotive Engine Fumes Disposal Filter Element - Replace - Closed Crankcase Ventilation (CCV)
3512C HD Locomotive Engine Maintenance Interval Schedule
2012/03/19 An Improved Crankshaft Seal Group is Used on Certain C9 and C9.3 Commercial Engines {1160, 1161}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169} Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170} Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101} Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
SPF343 and SPF343C Trailer Mounted Pumpers Configuration Parameters