SPF343 and SPF343C Trailer Mounted Pumpers Caterpillar


Refill Capacities

Usage:

SPF343 6RZ

Lubricant Capacity

The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require more oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.

Table 1
Approximate Refill Capacity for the 3512 Engine Lubrication System 
Compartment or System  Liters  US Gallons 
Standard sump  152 L  40 US gal 

Coolant Capacity

Table 2
Approximate Refill Capacities for the 3512 Engine Cooling System 
Compartment or System  Liters  US Gallons 
Jacket water system  134.2 L  35.4 US gal 
Separate circuit aftercooler  22.8 L  6 US gal 
External system     
Total cooling system     

Caterpillar Information System:

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555} Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405} Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405}
2012/03/21 New Engine Software Is Now Available for Certain C32 Generator Sets {1920}
Repair of Exhaust Shields on Certain C13 and C15 Engines{1059, 1067} Repair of Exhaust Shields on Certain C13 and C15 Engines{1059, 1067}
2012/05/04 New Software Is Available for Certain C18 Industrial Engines {1901, 1920}
3500E Marine Engines Coolant Temperature Regulator - Replace
C175-16 Marine Propulsion Engines Engine Misfires, Runs Rough or Is Unstable
C175-16 Locomotive Engine Aftercooler Coolant Temperature Is High
C175-16 Marine Propulsion Engines Exhaust Temperature Is Low
C175-16 Marine Propulsion Engines Engine Harness
2012/09/13 New Basic Engine Components Are Used in C175-16 Engines {1156, 1202, 1205, 1218}
TH48-E80 Petroleum Transmission Torque Converter and Transmission Oil Sample - Obtain
C175-16 Marine Propulsion Engines Stub Shaft (Front)
C175-16 Marine Propulsion Engines Air Inlet Elbow
C175-16 Marine Propulsion Engines Air Lines
C175-16 Locomotive Engine Aftercooler
C175-16 Marine Propulsion Engines Cover Group (Front Housing)
C175-16 Marine Propulsion Engines Flywheel Housing Cover
C175-16 Marine Propulsion Engines Fuel Injection Lines
C175-16 Marine Propulsion Engines Coolant Level Sensor
C175-16 Marine Propulsion Engines Water Lines
2012/04/24 Improved Coolant Filler Neck Is Used on Certain C32 Marine Engines {1379}
The Operator Monitor Group Malfunctions on D Series Excavators and Mobile Hydraulic Power Units{7490} The Operator Monitor Group Malfunctions on D Series Excavators and Mobile Hydraulic Power Units{7490}
SPF343 and SPF343C Trailer Mounted Pumpers Fuel Filter Differential Pressure - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.