2011/02/11 Caterpillar


Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}

Usage:

769C 01X


Caterpillar Products:
  • All
  • The new design fluid sampling valves can withstand higher working temperatures, higher pressures, and can provide a longer service life.




    Illustration 1g02413897

    (1) Current fluid sampling valve without a notch cut

    The current fluid sampling valves (part numbers 8C-3446, 164-5590 (includes part nos. 8C-3446 and 3J-7354), 7X-3387, 8C-3345, 159-8336) may leak. An improved design has been released. The part numbers for these fluid sampling valves remains the same, but change levels have been changed.




    Illustration 2g02413896

    (2) New design fluid sampling valve with a notch cut

    The newly designed fluid sampling valve may be used to replace the fluid sampling valve that has developed a leak. The differentiation is indicated by a notch in the hex. Refer to Illustration 1 for the current design and to Illustration 2 for the new design.

    Caterpillar Information System:

    3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Control Panel
    2011/02/09 New Configuration Feature for the Remote Advisor Panel for Some G3500 Petroleum Engines with NO<SUB>x</SUB> Feedback {1901, 1920}
    C11 and C13 Industrial Engines Grounding Stud - Inspect/Clean/Tighten
    UPSB505 Uninterruptible Power Supply Electrical Specification
    CG137-08 and CG137-12 Industrial Engines Cylinder Liner Projection - Inspect
    C11 and C13 Industrial Engines Engine Speed/Timing Sensor - Clean/Inspect
    CG137-08 and CG137-12 Industrial Engines Main Bearings - Inspect
    C4.4 Industrial Engine Temperature Sensor (DPF Inlet)
    C4.4 Industrial Engine Diesel Particulate Filter
    2011/01/27 A New Pressure Regulating Valve Is Used for Air Starting on some 3500B Marine Engines {108A, 1462}
    Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317} Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
    C11 and C13 Industrial Engines Engine Oil and Filter - Change
    C13 and C15 Generator Set Engines Fuel System
    C280 Marine, Marine Auxiliary, and Petroleum Engines Control Panel - Inspect/Test
    UPSB505 Uninterruptible Power Supply Product Location
    PM3516 Power Modules Parallel Operation
    C13 and C15 Generator Set Engines Air Inlet and Exhaust System
    3512C and 3516C Marine Auxiliary and Generator Set Engines Coolant Level - Check
    PM3516 Power Modules Battery Charger - Check
    345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
    345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
    C32 Generator Set Plate Locations and Film Locations
    CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is High
    345D, 349D and 349D2 Excavator Machine System Specifications Position Sensor (Stick)
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.