Blade Lift Cylinder
Show/hide table
Illustration 1 | g06352187 |
Show/hide table
Item | Qty | Part | Description |
---|---|---|---|
1 | 1 | 173-9683 Bolt | Torque to |
D1 | 1 | 336-6681 Cylinder As | Bore is |
D2 | 1 | 262-1919 Rod As | Diameter is |
2 | 1 | 148-2593 Head | Bore (D3) over three lands |
Lubricate the threads with clean grease.
Torque to |
|||
3 | 1 | 8J-6384 Bushing | Bore before assembly is |
4 | 1 | 289-2935 Buffer Seal As | Lubricate lightly with the lubricant that is being sealed. |
5 | 1 | 289-2946 U-Cup Seal | Lubricate lightly with the lubricant that is being sealed. |
6 | 1 | - | Before assembly, apply green Loctite 648 to the wiper seal groove. |
7 | 1 | 308-1845 Wiper Seal | Lubricate lightly with the lubricant that is being sealed. |
Caterpillar Information System:
C27 and C32 Tier 4 Engines Sensor Signal (PWM) - Test
14L Motor Grader Hydraulic and Steering System Ripper Lift Cylinder
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Graphic Color Codes
C27 and C32 Tier 4 Engines Injector Solenoid - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Hydraulic Tank (Brake, Hoist, Steering) - Remove and Install
C27 and C32 Tier 4 Engines Pressure Sensor - Calibrate
C27 and C32 Tier 4 Engines Acceleration Is Poor or Throttle Response Is Poor
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100} Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
325 VM and VH Variable Gauge Undercarriage Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
C18 Marine Engine Maintenance Recommendations
C18 Marine Generator Set Maintenance Recommendations
2010/05/31 Improvements Have Been Made to Remanufactured Fuel Injectors on C15 and 3406E Engines {1251, 1290}
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C27 and C32 Tier 4 Engines Electrical Power Supply - Test
3512C SR4B Generator Sets Model View Illustrations
325 VM and VH Variable Gauge Undercarriage Recoil Spring - Disassemble
325 VM and VH Variable Gauge Undercarriage Recoil Spring - Assemble
C27 and C32 Tier 4 Engines Data Link - Test
C175 Generator Sets Battery - Replace
Reassembly of the Throttle Body for Certain G3516B Engines{1265} Reassembly of the Throttle Body for Certain G3516B Engines{1265}
C175 Generator Sets Control Panel - Inspect/Test
C175 Generator Sets Coolant (DEAC) - Change
797F and 797F XQ Off-Highway Trucks Machine Systems Rear Axle Oil Cooler - Remove and Install
C18 Marine Generator Set Overhaul (Top End)