Fan Drive - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-9200     | 操纵杆滚轮起重机     | 1     |
注: 冷却系统的部件和重量可能根据您的配置总成而有所变化。
- 将工具 (A) 和适当的起吊设备连接到风扇驱动装置 (9) 。 风扇驱动装置 (9) 的重量约为 295 kg (650 lb)。 将风扇驱动装置 (9) 安装在散热器总成 (11) 上。
Show/hide table
图 1 | g01226031 |
Show/hide table
图 2 | g01226029 |
- 安装螺栓 (10) 。
- 安装防护罩组件 (8) 。
Show/hide table
图 3 | g01226028 |
- 安装防护罩组件 (7) 。
Show/hide table
图 4 | g01226027 |
- 安装防护罩组件 (6) 。
Show/hide table
图 5 | g01226021 |
- 安装皮带 (5) 。
Show/hide table
图 6 | g01226018 |
- 安装板 (4) 和防护罩组件 (3) 。
Show/hide table
图 7 | g01226015 |
- 将管组件 (1) 放置到位并连接管组件。
Show/hide table
图 8 | g01226011 |
- 连接线束组件 (2) 。
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove
CX31 On-Highway Transmission Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
3512B Oil Well Servicing Engine (ADEM III) Pulse Width Modulated Sensor
C7 Marine Engine Electric Starting Motor
C7 Marine Engine Electric Starting Motor
3512B Oil Well Servicing Engine (ADEM III) Speed Control
C6.6 Generator Sets Plate Locations and Film Locations
C175 Generator Set Engines Camshaft - Install
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Install
2008/02/11 New Injectors are Being Offered in Place of Remanufactured Injectors {1290}
320D and 323D Excavators Machine System Specifications Main Control Valve
CX31 On-Highway Transmission Power Train Gear Pump (Torque Converter and Transmission) - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Drive Plate - C-9, C9, C-10, C11, and C13 Engines
3512B Oil Well Servicing Engine (ADEM III) Sensor Supply
C175-16 and C175-20 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
3500 Engines Fan Drive - Disassemble
3126B and 3126E Truck Engines Cylinder Block
C7 Urban Transit Bus Engines Refill Capacities and Recommendations
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Gear Group (Front)
3500 Engines Fan Drive - Assemble
C175 Generator Set Engines Prelubrication Oil Pump - Remove and Install
3500 Locomotive Engines Turbocharger
CX31 On-Highway Transmission Power Train Modulating Valve (Transmission Clutch) - Remove and Install
3500B Engines Fuel Cooler - Remove and Install