The 191-9662 Gear Motor (FAN)
Illustration 1 | g00591148 |
(1) The inlet port (2) The outlet port (3) The relief valve (4) The port for excess flow to the oil cooler |
Displacement ... 13 cc/rev (0.79 in3/rev)
The rotation of the motor is clockwise when you view the motor from the shaft end.
Torque for the relief valve ... 18 ± 2 N·m (13 ± 1 lb ft)
Setting for the relief valve at a flow of 14.2 L/min (3.75 US gpm) ... 3050 ± 30 kPa (442 ± 4.3 psi)
Maximum gauge pressure at inlet ... 200 kPa (29 psi)
Fan speed at LOW idle ... 1225 ± 25 rpm
Fan speed at HIGH idle ... 2600 ± 50 rpm
The 191-9663 Gear Motor (FAN)
Illustration 2 | g00591148 |
(1) The inlet port (2) The outlet port (3) The relief valve (4) The port for excess flow to the oil cooler |
Displacement ... 13 cc/rev (0.79 in3/rev)
The rotation of the motor is clockwise when you view the motor from the shaft end.
Torque for the relief valve ... 18 ± 2 N·m (13 ± 1 lb ft)
Setting for the relief valve at a flow of 15.1 L/min (3.99 US gpm) ... 2400 ± 30 kPa (348 ± 4.4 psi)
Maximum gauge pressure at inlet ... 200 kPa (29 psi)
Fan speed at LOW idle ... 1225 ± 25 rpm
Fan speed at HIGH idle ... 2400 ± 50 rpm
The 216-6179 Gear Motor (HYDRAULIC FAN)
Illustration 3 | g01137660 |
(1) The inlet port (2) The outlet port (3) The relief valve (4) The case drain port |
Displacement ... 13.34 cc/rev (0.814 in3/rev)
Rotation of the motor from the shaft end ... Clockwise
Speed range for the motor at 15000 kPa (2180 psi) ... 500 to 3500 rpm
Relief valve
- Torque for the relief valve ... 35 N·m (26 lb ft)
- Torque for the nut ... 7 N·m (62 lb in)
- Setting for the relief valve at a flow of 14.2 L/min (3.75 US gpm) ... 3060 ± 100 kPa (444 ± 15 psi)
- Torque for the nut ... 7 N·m (62 lb in)
The 216-6182 Gear Motor (HYDRAULIC FAN)
Illustration 4 | g01137660 |
(1) The inlet port (2) The outlet port (3) The relief valve (4) The case drain port |
Displacement ... 13.34 cc/rev (0.814 in3/rev)
Rotation of the motor from the shaft end ... Clockwise
Speed range for the motor at 15000 kPa (2180 psi) ... 500 to 3500 rpm
Relief valve
- Torque for the relief valve ... 35 N·m (26 lb ft)
- Torque for the nut ... 7 N·m (62 lb in)
- Setting for the relief valve at a flow of 15.1 L/min (4.0 US gpm) ... 2700 ± 100 kPa (392 ± 15 psi)
- Torque for the nut ... 7 N·m (62 lb in)