Air Cleaner - Remove and Install
Removal Procedure
Start By:
- Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
- Loosen hose clamp (2). Hose clamp (2) connects hose (3) to pipe assembly (1) .
Show/hide table
Illustration 1 | g00738152 |
- Disconnect tube assembly (4) from the outlet pipe.
Show/hide table
Illustration 2 | g00738155 |
- Remove bolts (5). Remove the air cleaner housing and the pipe assembly as a unit.
Show/hide table
Illustration 3 | g00738156 |
Installation Procedure
- Put the air cleaner housing and the pipe assembly in position. Install bolts (5) .
Show/hide table
Illustration 4 | g00738156 |
- Connect tube assembly (4) onto the outlet pipe.
Show/hide table
Illustration 5 | g00738155 |
- Tighten hose clamp (2). Hose clamp (2) connects hose (3) to pipe assembly (1) .
Show/hide table
Illustration 6 | g00738152 |
End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Caterpillar Information System:
725 and 730 Articulated Trucks Rollover Protective Structure (ROPS) - Inspect
C-9 Engines for Caterpillar Built Machines Cylinder Block Cover Group
IT62G Series II Integrated Toolcarrier Warning Categories (Caterpillar Monitoring System)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Visual Inspection
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
IT62G Series II Integrated Toolcarrier Functional Test (Caterpillar Monitoring System)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust
Payload Control System (PCS) 2.X Service Tools
TH62, TH63, TH82 and TH83 Telehandlers Steering System Steering System
797 Off-Highway Truck Power Train Axle Shaft - Remove
2000/09/11 A New Wiring Harness Is Available {1408}
Caterpillar Monitoring System MID 030 - CID 0427 - FMI 08
527 Track-Type Skidder Engine Supplement Hood - Remove and Install
IT62G Series II Integrated Toolcarrier Diagnostic Codes (Caterpillar Monitoring System)
3512 and 3516 EUI Engines for Caterpillar Built Machines Electronic Circuits
527 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
Caterpillar Monitoring System MID 030 - CID 0428 - FMI 08
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery Disconnect Switch
2000/09/04 Additional Plugs for the Collets Are Now Available {4303, 5305, 6107, 7000}
2000/09/04 Pilot Valves Now Have Serviceable O-Rings and Seals {4342}
527 Track-Type Skidder Engine Supplement Alternator - Remove and Install
IT62G Series II Integrated Toolcarrier Indicators
Caterpillar Monitoring System MID 030 - CID 0826 - FMI 08