D346, D348 AND D349 INDUSTRIAL ENGINES Caterpillar


Emergency Stopping

Usage:

To stop in an emergency:

Mechanical Governor Control:

Pull upward on the hand grip, and move the control to the shutoff position.

Manual Shutoff Control:

Push and hold the control handle until the engine stops.

Woodward UG8 Governor:

Turn the load limit knob to "0".

Woodward PSG Governor:

Move the lever forward against the stop; hold the lever until the engine is stopped.

Mechanical Safety Shutoff Control:

Push and hold the emergency stop button momentarily to allow the overspeed mechanism to trip and start slowing the engine.


NOTICE

This button has a skirt. Do not confuse it with the reset button which is flat. Use this mechanical shutoff button for emergencies only. Do not use it for normal stopping.


Electric Shutoff Solenoid:

Push and hold the ON-OFF-STOP switch in the STOP position until the engine stops.

Air Controls:

Push and hold the ON-OFF-STOP switch in the STOP position until the engine stops.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.