Fuel Priming Pump And Base
Usage:
Remove And Install Fuel Priming Pump And Base
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life. |
1. Turn the fuel supply line valve to the "OFF" position.
2. Remove bolts (4), fuel priming pump (2), and the gasket.
3. Remove tube assembly (3).
4. Remove two bolts (1) and pump base (5).
NOTE: Install in reverse order.
Caterpillar Information System:
3306C DIESEL TRUCK ENGINE Oil Filter And Oil Filter Base
3306C DIESEL TRUCK ENGINE Fuel Transfer Pump
3306C DIESEL TRUCK ENGINE Fuel Ratio Control
3306C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3306C DIESEL TRUCK ENGINE Fuel Injection Pumps
3306C DIESEL TRUCK ENGINE Governor
3306C DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3306C DIESEL TRUCK ENGINE Fuel Injection Nozzles
3306C DIESEL TRUCK ENGINE Fuel Injection Lines
3306C DIESEL TRUCK ENGINE Governor Shutoff Solenoid
3306C DIESEL TRUCK ENGINE General Instructions (D & A)
3306C DIESEL TRUCK ENGINE Engine Vibration Troubleshooting
3306C DIESEL TRUCK ENGINE Fuel Filter And Base
3306C DIESEL TRUCK ENGINE Engine Oil Cooler
3306C DIESEL TRUCK ENGINE Jake Brake
3306C DIESEL TRUCK ENGINE Turbocharger
3306C DIESEL TRUCK ENGINE Wastegate
3306C DIESEL TRUCK ENGINE Exhaust Manifold
3306C DIESEL TRUCK ENGINE Water Temperature Regulator
3306C DIESEL TRUCK ENGINE Water Pump
3306C DIESEL TRUCK ENGINE Valve Cover
3306C DIESEL TRUCK ENGINE Rocker Shaft And Push Rods
3306C DIESEL TRUCK ENGINE Cylinder Head
3306C DIESEL TRUCK ENGINE Spacer Plate