Flywheel Housing Runout Face Runout (axial eccentricity) of the Flywheel Housing:
Usage:
8T5096 Dial Indicator Group Installed
1. Fasten a dial indicator to the crankshaft flange so the anvil of the indicator will touch the face of the flywheel housing.
2. Put a force on the crankshaft toward the rear before reading the indicator at each point.
3. With dial indicator set at 0.00 mm (.000 in) at location (A), turn the crankshaft and read the indicator at locations (B), (C) and (D).
4. The difference between lower and higher measurements taken at all four points must not be more than 0.38 mm (.015 in), which is the maximum permissible face runout (axial eccentricity) of the flywheel housing.
Caterpillar Information System:
3306C DIESEL TRUCK ENGINE Flywheel Runout
3306C DIESEL TRUCK ENGINE Flywheel Housing
3306C DIESEL TRUCK ENGINE Rear Gear Group (PTO)
3306C DIESEL TRUCK ENGINE Flywheel
3306C DIESEL TRUCK ENGINE Trunnion
3306C DIESEL TRUCK ENGINE Crankshaft Hub And Damper
3306C DIESEL TRUCK ENGINE Timing Gear Cover
3306C DIESEL TRUCK ENGINE Connecting Rod And Main Bearings
3306C DIESEL TRUCK ENGINE Bearing Surface (Journal) For Connecting Rods
3306C DIESEL TRUCK ENGINE Bearing Surface (Journal) For Main Bearings
3306C DIESEL TRUCK ENGINE Crankshaft
3306C DIESEL TRUCK ENGINE V-Belt Tension Chart
3306C DIESEL TRUCK ENGINE Flywheel Housing Bore
3306C DIESEL TRUCK ENGINE Alternators And Regulators 9L5938 12V 65A
3306C DIESEL TRUCK ENGINE Electric Starting Motors
3306C DIESEL TRUCK ENGINE Starter Solenoids
3306C DIESEL TRUCK ENGINE Shutoff Solenoids
3306C DIESEL TRUCK ENGINE Systems Operation
3306C DIESEL TRUCK ENGINE Testing And Adjusting
3306C DIESEL TRUCK ENGINE Introduction
3306C DIESEL TRUCK ENGINE High Fuel Consumption
3306C DIESEL TRUCK ENGINE High Fuel Consumption Complaints
3306C DIESEL TRUCK ENGINE Low Power And Engine Response Complaints
3306C DIESEL TRUCK ENGINE Low Power Complaints