Valve Seat Inserts
Usage:
Remove Valve Seat Inserts
START BY:
a. remove valves
1. Remove the valve seat inserts from the cylinder head with tooling (A).
2. Clean and remove any burrs from the valve seat bores.
Install Valve Seat Inserts
1. Lower the temperature of valve seat inserts (1), and install them with tooling (A).
Show/hide table
NOTICE |
---|
Do not make the diameter of the extractor larger when the insert is installed or damage to the insert and cylinder head can be the result. |
2. Grind valve seat inserts (1) to the values given in Specifications.
END BY:
a. install valves
Caterpillar Information System:
3500 VEHICULAR ENGINES Bridge Dowels
3500 VEHICULAR ENGINES Valve Lifters
3500 VEHICULAR ENGINES Valves
3500 VEHICULAR ENGINES Cylinder Head Assemblies
3500 VEHICULAR ENGINES Fuel Injection Control Linkage
3500 VEHICULAR ENGINES Fuel Injectors
3500 VEHICULAR ENGINES Rocker Shaft Assemblies And Push Rods
3500 VEHICULAR ENGINES Valve Covers
3500 VEHICULAR ENGINES Flywheel Housing
3500 VEHICULAR ENGINES Flywheel
3500 VEHICULAR ENGINES Air Starter
3500 VEHICULAR ENGINES Accessory Drive (Rear)
3500 VEHICULAR ENGINES Valve Guides
3500 VEHICULAR ENGINES Connecting Rod Bearings
3500 VEHICULAR ENGINES Rear Gear Group
3500 VEHICULAR ENGINES Spacer Plates
3500 VEHICULAR ENGINES Crankshaft Main Bearings
3500 VEHICULAR ENGINES Piston Cooling Jets
3500 VEHICULAR ENGINES Pistons And Connecting Rod Assemblies
3500 VEHICULAR ENGINES Cylinder Liners
3500 VEHICULAR ENGINES Camshafts
3500 VEHICULAR ENGINES Camshaft Bearings
3500 VEHICULAR ENGINES Crankshaft
3500 VEHICULAR ENGINES General Instructions